Part Number: 644.505.161.00
155mm Front bumper support tube set for 1959 356A models. This hard to find piece is finally available and made from the original U.S. style bumper support tubes. These tubes have an O.E. 'Adjusting Eye Hole'. A key detail to fit your exact bumper due to all cars being built by hand which can result in a difference in shape. The adjusting eye hole gets you to have your bumper correctly lined up with an area to adjust it correctly.

Part Number: 356.58.010 356
Front bumper for early 356 Pre A models.

Part Number: 900.076.013.02
Hexagon Nut, 8 mm, for 356 Pre-A (1950-1955), 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.

Part Number: 644.505.011.00
Front bumper for 356 (1950-1955) and 356A (1955-1959) models.

Part Number: 644.505.011.01
Non welded front bumper with brackets. Fits 356 (1950-1955) and 356A (1955-1959) models.

Part Number: 644.505.041.00
Complete front bumper deco with base gasket and insert. This will fit 356 and 356A models.

Part Number: 644.505.031.00
Concours quality reproduction LEFT FRONT or RIGHT REAR aluminum bumper guard.

Part Number: 644.505.032.00
Concours quality reproduction RIGHT FRONT or LEFT REAR bumper guard.

Part Number: 644.505.411.00
Rubber insert for front bumper deco of 356 and 356A models.

Part Number: 644.505.049.00
Front bumper deco base gasket for 356 and 356A models.

Part Number: 644.505.391.00
Plastic profile for short and tall bumper guards on the 356 and 356A (1950-1959) models. Two required.

Part Number: 644.505.131.00
Front bumper bracket set for 356 (Mid 1952-1955)and 356A (1955-1959) models.

Part Number: SMC.505.131.10
Front bumper bracket for 356 Pre-A and 356A models. This bracket welds onto the bumper. Four needed per car.

Part Number: 644.505.335.00
Rear bumper guard attaching nut for 356 and 356A models using exhaust funnels. Two required.

Part Number: SMC.000.891
Hexagon-headed bumper bracket bolt and waster set fits 356 and 356A models (1950-1959).

Part Number: SMC.505.131.55
Bumper bracket bar set.

Part Number: 644.505.191.00
Oval grommet for front protection tube on 356 and 356A models. Two required.

Part Number: 644.505.171.00
Grommet for protection tube supports on 356 and 356A models. Four required.

Part Number: 644.085.001.00
Bumper cap nut for 356 and 356A models. Four required.