Porsche Parts Heat & Exhaust

356 Volute Ring, All 356s (50-65)

Part Number: SMC.106.013.12
Reproduction 356 fan shroud volute ring. Made from 18 gauge stainless steel with six mounting tabs. Bare metal.Ring attaches to number 1 on the diagram. SMC-106-013-12 SMC.106.013.12 SMC10601312 SMC 106 013 12

$106.64

Compare

Click for Details

Qty:

Air Duct, All 356's/912 (50-69)

Part Number: 546.06.062
Air duct for all 356 and 912 models. 546-06-062 546.06.062 54606062 546 06 062

$52.56

Compare

Click for Details

Qty:

Air Guide Housing, all 356/912 (50-69)

Part Number: 616.106.013.12
CURRENTLY UNAVAILABLEAir guide housing for the fan shroud for all 356, 356A, 356B, 356C and 912 models (1950-1969). 616-106-013-12 616.106.013.12 61610601312 616 106 013 12

$581.97

Compare

Click for Details

Air Guide Tube, Left, All 356's/912

Part Number: 546.06.063
Left side air guide tube for all 356 and 912 models. 546-06-063 546.06.063 54606063 546 06 063

$145.39

Compare

Click for Details

Qty:

Air Guide Tube, Right, All 356's/912 (50-69)

Part Number: 546.06.064
Right side air guide tube for all 356 (1950-1965) and 912 (1965-1969) models. 546-06-064 546.06.064 54606064 546 06 064

$145.39

Compare

Click for Details

Qty:

Air Hose All 356's/912 (50-69)

Part Number: 616.211.296.00
Rubber short hose for 356 and 912 (1950-1969) European exhaust. 616-211-296-00 616.211.296.00 61621129600 616 211 296 00

$15.20

Compare

Click for Details

Qty:

Bursch GT3 Muffler Bracket, 911 (65-83)

Part Number:BA.7920.SS
Bursch GT3 Muffler Bracket for 911 models. Years 1965-1983. This is the bracket that holds the muffler straps to the chassis. Fits 911 (1965-1983) models using 997 GT3 FACTORY MUFFLER. One required. This set is hand-made in Pasadena, CA. Lifetime warranty! BA-7920-SS BA.7920.SS BA7920SS BA 7920 SS

$189.95

Compare

Click for Details

Qty:

Bursch GT3 Muffler Bracket, 911 (84-89)

Part Number: BA.7921.SS
Bursch GT3 Muffler Bracket for 911 models. Years 1984-1989. Rear Muffler Support Bracket for 911 (1984-1985), 911 Carrera (1986-1989) and 911 Speedster (1989) models using 997 GT3 FACTORY MUFFLER. One required. BA-7921-SS BA.7921.SS BA 7921 SS BA7921SS

$189.95

Compare

Click for Details

Qty:

Bursch Header/Extractor System, All 356's

Part Number: BA.7912.SS
Improve horsepower and efficiency with the iconic 356 Bursch high-performance header/extractor system with detachable stinger. Made from 16 gauge mandrel bent 304 stainless steel, this tuned system is a direct replacement and easy to install. The step system transitions 1 1/2" tubing to 1 5/8" tubing for maximum performance. This set is hand-made in Pasadena, CA. Lifetime warranty! Please inquire about special customizations or installation assistance. BA-7912-SS BA.7912.SS BA 7912 SS BA7912SS

$895.00

Compare

Click for Details

Qty:

Bursch J-Pipe Set, All 356's (50-65)

Part Number: BA.7919.B.SS
Inexpensive alternative to buying stock pipes with heater boxes! BA.7919.SS BA-7919-SS BA7919SS BA 7919 SS

$245.00

Compare

Click for Details

Qty:

Bursch Muffler, 356/356A (50-59)

Part Number: BX.5601.SS
Improve horsepower and efficiency with the iconic 356 Pre-A and A Bursch high performance muffler system. Made from mandrel-bent stainless steel tubing and a galvanized muffler, this system is a direct replacement and an easy install. This set is hand-made in Pasadena, CA. and features stainless steel baffling. Lifetime warranty! Please inquire about special customizations or installation assistance BX 5601.SS BX 5601.SS BX 5601.SS BX 5601.SS

$795.00

Compare

Click for Details

Qty:

Bursch Muffler, 356B/356C (60-65)

Part Number: BX.5603.SS
Improve horsepower and efficiency with the iconic 356B and 356C Bursch high performance muffler system. Made from mandrel-bent stainless steel, this muffler system is a direct replacement and an easy install. This set is hand-made in Pasadena, CA. and features stainless steel baffling. Lifetime warranty! Please inquire about special customizations or installation assistance BX 5601.SS BX 5601.SS BX 5601.SS BX 5601.SS

$795.00

Compare

Click for Details

Qty:

Bursch Racing 911 Megaphone Set

Part Number: BA.7917
Improve horsepower and efficiency with the iconic Bursch Racing Megaphone Set. These megaphones measure 17" in length and come in two tip designs. They are designed to fit Bursch 911 Mild Steel Headers. Megaphones come with all gaskets, nuts, bolts, and washers needed. Megaphones are sold in pairs only. Bursch also recommends buying the megaphone bracket assembly (part number). Select from the options drop-down for desired tip finish. The pictured set is the Cookie Cutter tip finish. This set is hand-made in Pasadena, CA. Lifetime warranty! BA-7917 BA.7917 BA 7917 BA7917

$385.00

Compare

Click for Details

Finish

Qty:

Bursch Racing 911 Megaphone Set with Silencer

Part Number: BA.7915.SS
Improve horsepower and efficiency with the iconic Bursch Racing Megaphone Set with silencer. 17” megaphones with built-in silencer and 3” diameter cookie cutter tip. These fit early 911’s with heat exchangers, SSI’s, or the current stainless steel Bursch headers. To be used for racing purposes only. Very loud but not as loud as straight open megaphones. Choice of Black Satin Powder Coating or Raw Stainless Steel. This set is hand-made in Pasadena, CA. Lifetime warranty! BA-7915 BA.7915 BA 7915 BA7915

$499.50

Compare

Click for Details

Style

Qty:

Bursch Racing Megaphone Set with Headers

Part Number:BX.7918.SS
Improve horsepower and efficiency with the iconic Satin Black Powder Coated Bursch Racing 911 Megaphone Set with Stainless Steel Headers! These megaphones measure 17" in length and come in four tip designs!BX-7918.SS BX.7918.SS BX 7918.SS BX7918.SS

$2,499.95

Compare

Click for Details

Tip

Qty:

Bursch Super Sport Exhaust System, 356B/356C

Part Number: BX.7922.SS
Improve horsepower and efficiency with the iconic 356B and 356C Bursch Super Sport Exhaust System. Made from mandrel-bent stainless steel tubing this system is a direct replacement and an easy install. Additionally, this exhaust was designed to clear aftermarket oil filter adapters such as the popular Precision Matters Full-Flow Oil Filter Adapter. This set is hand-made in Pasadena, CA., and features stainless steel baffling. Lifetime warranty! Please inquire about special customizations or installation assistance BX-7922-SS BX.7922.SS BX 7922 SS BX7922SS

$998.50

Compare

Click for Details

Qty:

Bursch Super Sport Exhaust System, 914

Part Number: BX.1404.SS
Improve horsepower and efficiency with the iconic 914 Bursch Super Sport Exhaust System. Made from mandrel-bent stainless steel tubing this system is a direct replacement and an easy install. Additionally, this exhaust was designed to clear aftermarket oil filter adapters such as the popular Precision Matters Full-Flow Oil Filter Adapter. This set is hand-made in Pasadena, CA., and features stainless steel baffling. Lifetime warranty! Please inquire about special customizations or installation assistance BX-1404-SS BX.1404.SS BX 1404 SS BX1404SS

$998.50

Compare

Click for Details

Qty:

Bursch Super Sport Exhaust Tip Set

Part Number: BA.7922.SS
Bursch Super Sport Exhaust Tip Set. This set is hand-made in Pasadena, CA., and features stainless steel baffling. Lifetime warranty! Please inquire about special customizations or installation assistance BA-7922-SS BA.7922.SS BA 7922 SS BA7922SS

$45.00

Compare

Click for Details

Qty:

Cable Clamp Nut, (65-89)

Part Number: 311.129.777
Cable clamp nut for most models from 1965 to 1989. 311-129-777 311.129.777 311129777 311 129 777

$10.09

Compare

Click for Details

Qty:

Dansk Muffler, 356 (50-55)

Part Number: 546.54.106
Dansk muffler comes with one straight tail pipe for 356 Pre-A (1950-1955) models. 546-54-106 546.54.106 54654106 546 54 106

$920.40

Compare

Click for Details

Qty:

Dansk Sport Muffler, All 356's

Part Number: 616.54.103
Dansk sport muffler comes with two straight tail pipes in Carrera® 4 cam style for all 356 models and years. Painted steel. Chrome tips part # 546.54.101 are NOT included. 616-54-103 616.54.103 61654103 616 54 103

$846.07

Compare

Click for Details

Qty:

Engine Cover Plate, 356 Pre-A, (50-55)

Part Number: 369.06.122
Engine cover plate for above the exhaust. Fits 356 Pre-A models. Years 1950-1955. This plate is specifically made for the 356 Pre-A 2-piece crankcase. 369-06-122 369.06.122 36906122 369 06 122

$1,956.68

Compare

Click for Details

Qty:

Exhaust Flange, All 356's/912 (50-69)

Part Number: 369.54.103
8.6 mm thick exhaust flange for repair purposes or custom exhaust applications, 4 required. Fits 356, 356A, 356B, 356C and 912 models. 369-54-103 369.54.103 36954103 369 54 103

$35.67

Compare

Click for Details

Qty:

Exhaust Gasket, All 356's/912 (50-69)

Part Number: 616.111.291.00
This Muffler gasket comes in two options, Victor Reinz and our own high quality reproduction that you won't find anywhere else. Our reproduction gasket is 1.7mm thick and is made in Europe to be thicker than the original. Fits 356, 356A, 356B, 356C and 912 models. Four required. 616-111-291-00 616.111.291.00 61611129100 616 111 291 00

$1.71

Compare

Click for Details

Type

Qty:

Exhaust Lock Nut, 8mm x 12mm

Part Number: 11.62.1.711.954
Copper flanged exhaust lock nut. Measures 8mm x12mm. 11-62-1-711-954 11.62.1.711.954 11621711954 11 62 1 711 954

$0.77

Compare

Click for Details

Qty:

Exhaust Manifold Stud, All 356's/912

Part Number: 999.062.005.02
8mm x 20mm stud. Fits 356, 356A, 356B, 356C, 911, and 912 models (1950-1969). Four required. 999-062-005-02 999.062.005.02 99906200502 999 062 005 02

$8.07

Compare

Click for Details

Qty:

Flat Washer (8mm x 37mm)

Part Number: 900.025.007.03
Flat washer measuring 8mm x 37mm. 900-025-007-03 900.025.007.03 90002500703 900 025 007 03

$1.60

Compare

Click for Details

Qty:

Grommet (11mm-17.5mm)

Part Number: 999.702.119.50
Rubber grommet for an opening with a diameter of 18mm. 999-702-119-50 999.702.119.50 99970211950 999 702 119 50

$6.05

Compare

Click for Details

Qty:

Guide Sleeve, 356/356A (50-59)

Part Number: 644.424.731.00
CURRENTLY UNAVAILABLEGuide sleeve for 356 and 356A (1950-1959) models. 644-424-731-00 644.424.731.00 64442473100 644 424 731 00

$7.06

Compare

Click for Details

Heater Box Control Sleeve, All 356's (50-65)

Part Number: 644.211.751.00
Heater control rod sleeve for all 356 (1950-1965) models. Six required. 644-211-751-00 644.211.751.00 64421175100 644 211 751 00

$7.06

Compare

Click for Details

Qty:

Heater Box Hexagon Bolt, All 356's (50-65)

Part Number: 644.211.755.00
Hexagon headed bolt for heater box on all 356 models. Two required. 644-211-755-00 644.211.755.00 64421175500 644 211 755 00

$9.08

Compare

Click for Details

Qty:

Heater Box Return Spring, All 356's (50-65)

Part Number: 539.06.644
Heater box return spring for all 356 (1950-1965) models. 539-06-644 539.06.644 53906644 539 06 644

$28.21

Compare

Click for Details

Qty:

Heater Box Smooth Bolt, All 356's (50-65)

Part Number: 644.211.755.01
Smooth bolt for heater control rods on all 356 models. Four required. 644-211-755-01 644.211.755.01 64421175501 644 211 755 01

$9.08

Compare

Click for Details

Qty:

Heater Cable Cover Boot, All 356's (50-65)

Part Number: 356.24.408
Rubber boot for heater cable cover for all 356 models (1950-1965). Two required. 356-24-408 356.24.408 35624408 356 24 408

$7.06

Compare

Click for Details

Qty:

Heater Control Rod Hardware Kit, All 356's (50-65)

Part Number: SMC.211.901
JÖRG Auto Parts heater control rod hardware kit for all 356 models. Years 1950-1965. This kit contains the necessary bolts, spacers, nuts and washers to install the heater control rods between the flapper boxes and heater valves. 24 pieces are included. SMC-211-901 SMC.211.901 SMC211901 SMC 211 901

$56.45

Compare

Click for Details

Qty:

Heater Control Rod Spring Washer, All 356's (50-65)

Part Number: N.012.226.5
6mm spring washer for heater control rods on all 356 (1950-1965) models. Six required. N-012-226-5 N.012.226.5 N0122265 N 012 226 5

$1.13

Compare

Click for Details

Qty:

Heater Control Rod, Left, All 356's (50-65)

Part Number: 644.211.701.00
Heater control rod for the left side of all 356 (1950-1965) models. 644-211-701-00 644.211.701.00 64421170100 644 211 701 00

$8.07

Compare

Click for Details

Qty:

Heater Control Rod, Right, All 356's (50-65)

Part Number: 644.211.702.00
Heater control rod for right side on all 356 models. 644-211-702-00 644.211.702.00 64421170200 644 211 702 00

$8.07

Compare

Click for Details

Qty:

Heater Valve to Body Clamp, All 356's

Part Number: PCG.211.251.00
Heater valve to body clamp. Two required.

**Screw is not included. PCG-211-251-00 PCG.211.251.00 PCG21125100 PCG 211 251 00

$15.81

Compare

Click for Details

Qty:

Hex-head Screw, M8 x 35, All 356's (50-65)

Part Number: 900.074.037.02
Hex-head Screw for 356 Pre-A (1950-1955), 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models. Measures 8mm x 35mm. 900-074-037-02 900.074.037.02 90007403702 900 074 037 02

$2.89

Compare

Click for Details

Qty:

Hot Air Hose, 356/356A (50-59)

Part Number: 644.211.921.00
Heater hose measuring 50mm x 270mm. Two required. Use with hose clamp #999.512.348.02. 644-211-921-00 644.211.921.00 64421192100 644 211 921 00

$8.07

Compare

Click for Details

Qty:

Hot Air Hose, 50mm x 1080mm

Part Number: SMC.100.613.087
Universal aftermarket 50mm x 1080mm hose with the correct OE paper/alum/paper material. SMC-100-613-087 SMC.100.613.087 SMC100613087 SMC 100 613 087

$7.06

Compare

Click for Details

Qty:

Hot Air Hose, All 356's/912 (50-69)

Part Number: 911.211.522.01
Black aluminum hose for 356 and 912 (1950-1969) European exhaust. Measures 60mm x 1110mm. 911-211-522-01 911.211.522.01 91121152201 911 211 522 01

$22.27

Compare

Click for Details

Qty:

IDF Carburetor Repair Kit

Part Number: 92.3240.05
Rebuild Kit for 40 44 48 IDF Weber Carburetors. Kit includes early and late style accelerator pump diaphragms, 40 44 48 IDF top cover gaskets, base gaskets etc.. See picture for parts included. One needed per carburetor. 92-3240-05 92.3240.05 92324005 92 3240 05

$25.74

Compare

Click for Details

Qty:

Lock Nut, 6mm

Part Number: 900.076.010.01
CURRENTLY UNAVAILABLE
900-076-010-01 900.076.010.01 90007601001 900 076 010 01

$0.11

Compare

Click for Details

Lock Nut, 6mm, All 356's/944 (50-91)

Part Number: 900.076.010.02
6mm lock nut for all 356 (1950-1965) and 944 (1985-1991) models. Six required. 900-076-010-02 900.076.010.02 90007601002 900 076 010 02

$0.35

Compare

Click for Details

Option

Qty:

Muffler Pipe Kit, 356A

Part Number: 616.111.005.00
It fits all OE mufflers for 356A models (1955-1959). Painted aluminized steel. 616-111-005-00 616.111.005.00 61611100500 616 111 005 00

$167.57

Compare

Click for Details

Qty:

Muffler Tip With Square Rolled Edge

Part Number: 547.54.110
Brand new high-quality reproduction of the early exhaust chrome tip with correct SQUARE ROLLED EDGE. Factory installed on 356 Super and optional for all other models with Sport muffler (part # 616.54.103). Heavy brass pipe with deep chrome, 120 gr. For 45mm pipes, 160m length. 547-54-110 547.54.110 54754110 547 54 110

$63.97

Compare

Click for Details

Qty:

Muffler to Heater Exchange Clamp, All 356's/912

Part Number: SMC.54.109
Muffler to heater exchanger clamp for all 356's and 912 models. Two required. SMC-54-109 SMC.54.109 SMC54109 SMC 54 109

$8.07

Compare

Click for Details

Qty:

Muffler to Heater Exchange Clamp, All 356's/912

Part Number: 369.54.109
Muffler to heater exchanger clamp for all 356's and 912 models. Two required. 369-54-109 369.54.109 36954109 369 54 109

$18.55

Compare

Click for Details

Qty:

Pipe Clamp with Bracket, All 356's (50-65)

Part Number: 616.111.025.00
Pipe clamp with bracket for all 356 models (1950-1965). 616-111-025-00 616.111.025.00 61611102500 616 111 025 00

$18.75

Compare

Click for Details

Type

Qty:

Seal Ring,18mm x 24mm

Part Number: 900.123.11.30
Seal ring for pressure pipe pump converter. Measures 18mm x 24mm. 900-123-11-30 900.123.11.30 9001231130 900 123 11 30

$2.50

Compare

Click for Details

Qty:

Sport Exhaust Muffler, all 356's (50-65)

Part Number: PO.92104
Sport exhaust muffler for 356, 356A, 356B and 356C models (1950-1965). This muffler is painted steel and come with straight, stainless steel tips. PO-92104 PO.92104 PO92104 PO 92104

$631.28

Compare

Click for Details

Sport Muffler, Silver, All 356's (50-65)

Part Number: SMC.616.54.103
Sport muffler comes with two straight tail pipes in Carrera® 4 cam style for all 356 models and years. Painted steel. Chrome tips part # 546.54.101 are NOT included. SMC-616-541-03 SMC.616.541.03 SMC61654103 SMC 616 541 03

$1,233.82

Compare

Click for Details

Qty:

Ventilation Switch Housing, All 356's (50-65)

Part Number: 644.571.802.06
Ventilation switch housing for all 356 (1950-1965) models. 644-571-802-06 644.571.802.06 64457180206 644 571 802 06

$313.43

Compare

Click for Details

Qty:

> 356 Pre-A (50-55) > Heat & Exhaust

Search

Categories

Information

Maintenance