Part Number: SMC.003.006.00
CURRENTLY UNAVAILABLESteel 16" x 3.25" wheel for Porsche 356 Pre A road cars (pre September 1952). Welded construction.

Part Number: SMC.101.170
EMPI 15 x 4.5 aluminum alloy drum brake wheel for 356 Pre-A (1950-1955), 356A (1955-1959) and 356B (1959-1963) models. This vintage wheel can offer at least 10lb in savings of wheel weight over the original steel wheel and add significant performance gain in braking and acceleration. This lightweight aluminum alloy wheel is available in silver and polished finish.

Part Number: SMC.101.171
EMPI 15 x 5.5 aluminum alloy drum brake wheel for 356 Pre-A (1950-1955), 356A (1955-1959) and 356B (1959-1963) models. This vintage wheel can offer at least 10lb in savings of wheel weight over the original steel wheel and add significant performance gain in braking and acceleration. This lightweight aluminum alloy wheel is available in silver and polished finish.

Bolt Pattern: 5×205

Back Spacing: 4"

Approved: DOT-T

Load Rating: 1180lb

Lug: Ball Seat

Part Number: 900.075.024.03
Set of three camshaft gear wheel bolts for all 356 (1950-1965) models. Bolts measure 8mm x 13mm.

Part Number: SMC.361.03.SET
Set of four aftermarket chrome wheels professionally mounted and balanced on quality tires.

Part Number: SMC.361.02.SET
Set of four aftermarket chrome wheels professionally mounted and balanced on quality tires. The wide-5 drum brake wheels measure 15" x 5.5" which are mounted to 165/80 R15 tires. Very few shops can correctly balance these early wheels so we have done the work for you. This set is ready to be bolted on and enjoyed.

Part Number: SMC.361.01.SET
Set of four aftermarket painted blue tint steel wheels professionally mounted and balanced on quality tires. The wide-5 drum brake wheels measure 15" x 4.5" which are mounted to 165/80 R15 tires. Very few shops can correctly balance these early wheels so we have done the work for you. This set is ready to be bolted on and enjoyed.

Part Number: SMC.361.04.SET
Set of four aftermarket painted blue tint steel wheels professionally mounted and balanced on quality tires. The wide-5 drum brake wheels measure 15'' x 5 1/2'' which are mounted to 165/80 R15 tires. Very few shops can correctly balance these early wheels so we have done the work for you. This set is ready to be bolted on and enjoyed.

Part Number: 209185
Flat spot reducing tire mat for vehicles standing or parked for long periods of time.

Part Number: PCG.68.119
Set of five metal clips and rivets for the hubcaps. For all 356 (1950-1965) models with drum brakes.

Part Number: 356.68.021
Five lug, painted steel wheel for 356 Pre-A (1950-1955) models. Measures 16'' x 3.25''.

Part Number: SMC.000.024.26
Tire and mount.

Part Number: PCG.044.610.00
Tire protector, set of four, for tires up to 255 mm wide.

Part Number: PCG.044.610.10
Tire protector, single, for tires up to 255 mm wide.

Part Number: SMC.020.112.1
JÖRG open-ended titanium lug nut set for 356, 911, 912, 930, 944, 914 and 964 models. Years 1950-1996. This set includes 20 lug nuts.

Part Number: PCG.044.400.00
Valve cap for tire protector.

Part Number: SMC.111.000
Vredestein classic tires.

Part Number: SMC.356.341.32
36mm wheel stud for the drum brakes on 356 Pre-A (1950-1955), 356A (1955-1959) and 356B (1960-1963) models. Standard Length. Measured from the bottom of the bolt to the bottom of the bolt head.

Part Number: SMC.861.600
Five-lug, chrome steel drum brake wheel for 356A and 356B models (1955-1963). Measures 15x5 1/2".

Part Number: SMC.861.500
Five-lug chrome steel drum brake wheel for 356A and 356B models (1955-1963).

Part Number: SMC.861.400
Five-lug, painted blue tint steel drum brake wheel for 356A and 356B models (1955-1963). Measures 15x5 1/2".

Part Number: SMC.861.300
Five-lug painted blue tint steel drum brake wheel for 356A and 356B models (1955-1963). Measures 15" x 4 1/2".

Part Number: 356.68.108
Two right and two left side anodized aluminum wheel trim set. It also known as "beauty rings". It fits all 356 Pre models with 16" wheels. Quantity is limited. Please call with any questions.

Part Number: 644.68.101.70
High quality production of the magnesium wheel.

Part Number: SMC.044.300
These aluminum drum covers are a must for your 356, Speedster or Spyder Replica. Sold as a set of four.

Part Number: SMC.68.15
Set of five JÖRG Carrera style wheel spacers. One set needed per wheel.

Part Number: SMC.68.20
Set of five JÖRG Carrera style wheel spacers. One set needed per wheel.

Part Number: NOS.68.20
One set needed per wheel.

Part Number: 915233
Aluminum wheel spacer for your 356 model. It fits all 356, 356A, 356B.

Part Number: 644.361.002.00
Two options to choose from.

Part Number: 900.012.025.00
Dowel pin for wheel hub fits all 356 models (1950-1965).

Part Number: 999.055.001.20
Rivet for hubcap clip, 25 required. Fits 356/356A/356B

Part Number: 356.68.SET
Set of five hubcap metal clips with rivets for aftermarket steel drum wheels ONLY. One set per wheel.

*NOTE: Original factory wheels, use part #PCG.68.119.

Part Number: 356.68.119
Metal clip for original factory steel wheels. Rivet part # 999.055.001.20 is not included. NOTE: for aftermarket steel wheels please purchase part # 356.68.KIT.

Part Number: SMC.721.935.10
Now you can remove your Porsche hubcaps or center caps without damaging them.

Part Number: SMC.68.120
Now you can install your new hubcap clips correctly with this new tool. Simply clamp the mandrel into a standard bench vice, and peen rivets with a hammer and punch.

Part Number: PNA.705.001.99
Fits any standard air valve stem!

Part Number: SMC.900.413.01
Set of four chrome valve stems. Perfect for all models!

Part Number: 644.361.202.10
Original period correct valve stem cap set.

Part Number: PNA.705.002.00
These color valve stem caps are designed to compliment and add that finishing touch to your wheels. Fits any standard air valve stem.

Part Number: SMC.900.413.00
Always replace the rubber valve stem when replacing tires.

Part Number: SMC.410.003
Soft wheel lock nut socket. Fits all Porsche lock nuts manufactured from 1950 to 1998. Includes plastic sleeve to protect the surface around the bolt. Measures the standard 19mm. Specially recommended for alloy nuts.

Part Number: N.020.112.1
Open-ended lug nut for all steel wheels fits all Porsches starting in 1950 to 1986.

Part Number: SMC.816.45.SET
Currently unavailable

Part Number: 993.361.057.00
Wheel lock set fits 356, 911, 912, 911 Turbo, 964, 928, 968 and 993 models (1950-1998).

Part Number: 901.341.671.01
40mm wheel stud for the drum and disc brakes on all 356 (1950-1965) models. Standard Length. Measured from the bottom of the bolt to the bottom of the bolt head.

Part Number: 356.331.903.00
Fix your stripped drums!

Part Number: 997.361.445.00
Stick-on balance wheel weight for all models. This item is 45g. This part is SUPERSEDED from 901.361.414.50.

Part Number: H390020
Hoffman wheel weight for all models and years. Zinc adhesive, 20 grams, each box contains 25 weights. Measures 39.4mm L x 15mm W x 6.2mm H.

Part Number: 356.68.211
Tire rim valve holder for drum brake wheels for 356A and 356B models (1955-1963). Five required.

Part Number: 644.722.010.00
This NEW, updated, genuine Porsche jack fits 356, 356A, 356B, 356C, 911 and 912 models (1950-1968).

Part Number: SMC.559.149.20
Jack pad for all 356's (1950-1965), 911 (1965-1989), 912 (1965-1969), 914-4 (1970-1976), 914-6 (1970-1972) and 930 (1976-1989). Designed for use with hydraulic floor jack and it is inserted into the jack receiver.

Part Number: 356.72.001
CURRENTLY UNAVAILABLEConcours show quality cloth tire strap for all Speedsters (1954-1958) and few early Convertible D (1959) models.

Part Number: SMC.200.010
Excellent reproduction 356A, 356B and 356C leather spare tire strap.

Part Number: 644.504.001.00
Excellent reproduction leather spare tire strap for all 356 models (1950-1965).