Part Number: SMC.043.803
Rebuild kit for a Bosch cis K Jetronic adjustable fuel injection metering distributor.

Part Number: 901.603.106
Alternator 12V-55A for 911 Models. Years 1965-1977.

Part Number: 901.603.907.00
Alternator Brushes, 911 (1965-1983), 912 (1965-1969), 930 (1975-1977) models.

Part Number: 900.078.005.03
Alternator nut. Measures 14mm x 1.5mm.

Part Number: 911.603.120.DX
Alternator for 911 (1978-1983) models.

Part Number: 901.602.852.01
Ballast resistor for 911 and 912 (1965-1969) models.

Part Number: 999.613.017.40
Black plastic insulator tube for all 356 (1950-1965), 911/912 (1965-1973), 911/930 (1974-1989) and 914 (1970-1976) models.

Part Number: 911.602.021.CX
Bosch distributor for 911 and 911T (1970-1977) models.

Part Number: 911.602.022.X
Currently unavailable

Part Number: 901.602.702.00
This Perma Tune CDI ignition control box has 2-year service warranty. It fits 911 (1969-1977) and 914 (1970-1972) models.

Part Number: 901.602.702.X
This rebuilt OEM Bosch CDI ignition control box has 1 year service warranty. Core unit can not be water or fire damaged and must be a Bosch unit. It fits 911 and 930 (1969-1977) models.

Part Number: SMC.000.106
Console for twin ignition coil. fits 911 and 912 (1965-1973) models.

Part Number: 911.602.933.00
Distributor cap for 911 (1965-1977) and 914-6 (1970-1972) with Bosch distributor. Modification necessary, you will need to file notch as original.

Part Number: 25.4768
NOS replacement "dark brown" early style Bosch distributor cap with round semi-circle relief and copper contact points. It fits 911 (1965-1977) and 914-6 (1970-1972) models. Related part # 911.602.933.00 & 1-235-522-109. Limited quantities.

Part Number: NOS.25.4768
NOS replacement "dark brown" early style Doduco distributor cap with cooper contact points. It fits 911 (1965-1977) and 914-6 (1970-1972) models. Related part # 911.602.933.00 & 1-235-522-109. Limited quantities.

Part Number: 616.602.907.02
Condenser for all 356 (1950-1965) and 912 with "cast iron" distributors and all 911 (1965-1968) models.

Part Number: 911.602.947.00
Distributor dust cover for 911 (1973-1977) models.

Part Number: NLA.109.954.00
Distributor plug wire set for all 356 and 912 models. Plug connectors NOT included.

Part Number: SMC.043.808
Distributor rebuild kit for 911 2.7 S Carrera (1973-1977) models.

Part Number: 911.602.925.00
Distributor rotor (7100 RPM limit) fits 911(1965-1968), 911L(1968), 911E(1969-1973) models. It does not fit 911S(1967-1973) and 91T(1969-1973) models.

Part Number: 911.602.928.00
Distributor rotor fits 911T, 911, and 914-6 models (1969-1977).

Part Number: 911.602.929.00
Distributor rotor fits 911S models (1967-1973).

Part Number: 911.602.102.01
Distributor seal fits 911, 930, 911 Turbo, C2, and C4 models (1972-1998).

Part Number: 999.659.011.50
Elecrical wire cap for 356B, 356C, 911, 912 and 930 (1960-1986) models.

Part Number: 911.631.315.01
Engine compartment light assembly. Fits 1965-1989.

Part Number: SMC.107.764.10
Engine tune up for for 911 models (1965-1969) with 2.0L engine. This kit includes (1) alternator v-belt, (1) oil filter, (1) distributor cap, (1) distributor rotor, (1) ignition point set, (2) oil sump gaskets and (6) spark plugs. Please note that this kit fits models with a Bosch distributor, if you have a Marelli distributor please call 888-986-4466 for more details.

Part Number: SMC.107.764.08
Engine tune up for for 911 models (1970-1971) with 2.2L engine. This kit includes (1) alternator v-belt, (1) oil filter, (1) distributor cap, (1) distributor rotor, (1) ignition point set, (2) oil sump gaskets and (6) spark plugs. Please note that this kit fits models with a Bosch distributor, if you have a Marelli distributor please call 888-986-4466 for more details.

Part Number: SMC.107.764.01
Engine tune up for 911 models (1972-1973) with a 2.4L engine.This kit includes (1) alternator v-belt, (1) oil filter, (1) distributor cap, (1) distributor rotor, (1) ignition point set, (2) oil sump gaskets and (6) spark plugs. Please note that this kit fits models with a Bosch distributor, if you have a Marelli distributor or a 911RS please call 888-986-4466 for more details.

Part Number: SMC.107.764.11
Engine tune up for for 911T models (1969-1971) with 2.2L engine. This kit includes (1) alternator v-belt, (1) oil filter, (1) distributor cap, (1) distributor rotor, (1) ignition point set, (2) oil sump gaskets, (6) spark plugs and (1) distributor condenser. Fits Magnetti Marelli distributors.

Part Number: 901.100.807.00
Float for 911 (1965-1973), 912 (1965-1969), 914 (1970-1976) models.

Part Number: 999.651.128.00
Bracket for the front fuse box cover. Fits 911 (1965-1973) and 912 (1965-1969) models.

Part Number: SMC.043.809
Fuel distributor rebuild kit to repair 6 cylinder non-adjustable cast iron CIS K Jetronic.

Part Number: SMC.612.093.10
Cover for the 3 fuse fuse box for 911 (1970-1973) models.

Part Number: 911.612.093.00
Three fuse box for 911 (1970-1973) models. Fuses are not included.

Part Number: 901.603.909.00
Handle alternator for 911 and 912 (1965-1977) models.

Part Number: 911.612.024.00
Headlight wiring harness for the left side of 911 (1970-1973) models.

Part Number: NLA.602.108.55
Ignition coil bracket.

Part Number: SMC.602.108
Perfect reproduction of the original Bosch coil bracket. It fits 356A, 356B, 356C, 911 (1965-1968), 912 (1965-1969) and 914 (1970-1976) models.

Part Number: 901.602.102.01
Standard 12V Bosch ignition coil for early 911 models.

Part Number: 616.602.109.01
It fits: 356 all (12V system), 912 (66-69), 914 (70-71), 914/4 (72-76).

Part Number: 901.602.502.01
Black 12-Volt ignition coil for CDI ignitions. Fits 911 (1969-1983) models.

Part Number: 616.602.227.02
Bosch ignition condenser for 911 and 911L (1968) models.

Part Number: 901.613.160.02.KIT
Ignition lock cover kit for 911 and 912 (1965-1973) models. Includes outer bezel and spacer plate.

Part Number: 901.602.960.00
One piece Ignition point set for 911 (1972-1973) models.

Part Number: 911.602.936.00
Ignition points set for 911 (1972-1977). Note: Only for use with Bosch distributors.

Part Number: 616.602.226.02
One piece point set for 356's and 912 with die cast aluminum distributors, 911 with Bosch distributor (1969-1971) and all 914-6 (1970-1972) models.

Part Number: 616.602.226.03
Two piece ignition point set for all 356's/912 with cast iron distributor and 911(65-68) models.

Part Number: SMC.613.160.02
Ignition starter switch bezel for larger threaded (27 mm) switches on 911 and 912 (1965-1973) models. Does not include trim cover or spacer.

Part Number: 901.613.160.02
Ignition Starter Switch Cover Bezel for 911 (1965-1973) and 912 (1965-1969).

Part Number:SMC.613.191.55
Ignition backing plate for 911 and 912 (1965-1968) models.

Part Number: SIC.613.160.72
Ignition switch bezel for 911 models years 1972+ with 18.6mm hole.

Part Number: 911.613.163.00
Ignition switch bezel for 911 (1970-1973) models.

Part Number: 901.613.191.00
Ignition switch bezel for 911 and 912 (1965-1968) models.

Part Number: 122.035.281
Ignition wire cap for 911, 914 and 930 models (suppressor end at cap). Six required

Part Number: SMC.609.061.10
Currently unavailable

Part Number: 911.609.061.00
Ignition wire set including six spark plug connectors for 911 and 914 models (1965-1972).

Part Number: SMC.609.061.00
This ignition wire set has the correct "brown" angled spark plug connectors for 911(1969-1989) and 914/6(1970-1972) models.

Part Number: SMC.604.101.01
Starter works great in hot or cold climates, or with engines that have high compression ratio. Its full ball-bearing construction and advanced electrics provide more cranking torque than standard starters. Features adjustable mounting face. Puts out 1.9hp and weighs only 8 lbs.

Part Number: 901.602.953.00
Distributor cap for 911 (1969-1971) and 914/6 (1970-1972) models with Magnetti Marelli distributor.

Part Number: 901.602.931.00
Condenser for 911T (1969-1973) and 914/6 (1970-1972) models with Magnetti Marelli distributor.

Part Number: 901.602.928.01
Distributor rotor for 911 (1969-1973) and 914/6 (1970-1972) models with Magnetti Marelli distributor.

Part Number: 911.602.960.00
Ignition point set for 911 (1969-1973) and 914/6 (1970-1972) models with Magnetti Marelli distributor.

Part Number: SMC.613.571.01
OE type oil pressure switch with screw connection.

Part Number: 901.613.571.01
OE Supplier oil pressure switch for 356's, 911 and 912 models.

Part Number: 911E9021
CURRENTLY UNAVAILABLE

Part Number: 911E905
Perma tune ignition system for 12 volt 356 and all early pre-electronic 911 cars with carburetors.

Part Number: 911902
Ignition system for 911 (1969-1977) and 914 (1970-1972) models. Use with 50 0012 Coil. Warranty issues must be authorized by Plasma Tronics before units are returned to Sierra Madre Collection or credit can not be processed.

Part Number: 40011.40511
This 40,000 volt ignition coil benefits virtually any distributor type inductive system.

Part Number: SMC.616.609.81
Pertronix ignition system for 911 (1965-1977), 930 (1976-1977) and 914-6 (1970-1971) models.

Part Number: 900.031.001.60
Plastic washer for interior door light switch. Measures 4.8mm. Fits 911, 912, 964 and 993 (1965-1989) models.

Part Number: 692.609.301.00
Extra long (BEL 4/1) spark plug connector for all 356's, 912 and 911 models.

Part Number: 616.609.302.00
No longer available

Part Number: 0.300.111.0016
No longer available

Part Number: 999.659.006.50
Protection cap.

Part Number: 911.612.039.10
Rear light wiring harness for 911 (1970-1983) models.

Part Number: 999.703.039.50
Rubber plug for 911 and 912 models.

Part Number: 539.09.201
Spark plug connector boot for all 356 (1950-1965), 911 (1965-1989), 912 (1965-1969), 914 (1970-1976), 930 (1976-1989), 912E (1976) and 911 Turbo (1990-1992) models. Please note that all 356's, 912, 912E and 914-4 models require four. All other models require six.

Part Number: 111.905.449.A
Spark plug connector boot for all 356 (1950-1965), 911 (1965-1989), 912 (1965-1969), 914 (1970-1976), 930 (1976-1989), 912E (1976) and 911 Turbo (1990-1992) models. Please note that all 356's, 912, 912E and 914-4 models require four. All other models require six.

Part Number: 122.905.449A
Spark plug connector boot for 356, 911, 912 and 914 models.

Part Number: 901.609.309.00
Spark Plug Connector for 911(1965-1976), 914 (1972) and 914 6 (1970-1971) models.

Part Number: SMC.611.SET
Metal spark plug holders with high heat resistant protector. It fits most Porsche models. These holders were used by the Porsche racing team in cars like the 911R, 911RS, 911RSR, 935, 934 and 906.

Part Number: 999.701.010.50
Spark plug o-ring for 356, 356A, 356B, 356C, 911, 914 and 930 models (1950-1989).

Part Number: SMC.608.SET
Rubber spark plug wire holder with metal support base. It fits most Porsche models.

Part Number: SMC.609.SET
Metal spark plug wire holders with high heat resistant rubber grommet. It fits most Porsche models. These wire holders were used by the Porsche racing team in cars like the 911R, 911RS, 911RSR, 935, 934 and 906.