Classic European Auto Parts
1.888.986.4466
+1.323.593.4300 (Outside U.S.)
Sales@SierraMadreCollection.com
Menu

> 911/912 (65-73) > Tools, Books & Accessories > Tools

10K Volt Flat Blade Screw Driver, 911/912/914-6 (69-73)
Part Number: 999.191.002.01
Limited quantity
$155.54
10K Volt Screw Driver, Phillips, 911/912/914-6 (69-73)
Part Number: 900.137.001.04
10k volt Phillips screw driver for 911, 912 and 914-6 (1969-1973) models.
$155.54
3M Electrical Tape
Part Number: 16578
General purpose vinyl insulating tape with excellent resistance to abrasion, moisture, alkalies, acid, copper corrosion, and varying weather conditions. Can be used as a primary electrical insulation for all wire and cable splices rated up-to 600 volts. Measures 3/4in wide x 60ft long x .007in thick.
$4.59
3M Strip Calk, Black, 1 Ft.
Part Number: 051135-08578
3M™ Strip-Calk is a soft butyl rubber caulking material that quickly and permanently fills all types of seams, joints and openings – long-lasting auto body maintenance and repair in much less time.
$27.50
Aluminum Racing Jack, Two Ton
Part Number: 1532
Dual pump pistons - five pumps to maximum height of 18 inches. Low profile. Aircraft-grade billet aluminum provides strength with maximum weight savings. Two-piece, 45" long handle snaps together for quick set up. Removable, rubber saddle pad protects vehicle and prevents slipping. Meets ANSI PALD, Part 10. 3-1/2" min height. 18" max height. 45" handle length.
$452.43
Bilstein Front Shock Absorber Gland Nut Tool, Max. Drehmoment, 140 Nm, MS 08/6
Part Number: SMC.006.21
Bilstein front shock absorber gland nut tool, Max. Drehmoment, 140 Nm, MS 08/6. Installs and removes front shock absorber special retention nut.
$21.95
Bilstein Style Car Jack, 356/911/912 (56-71)
Part Number: 644.722.010.00
This NEW, updated, genuine Porsche jack fits 356, 356A, 356B, 356C, 911 and 912 models (1950-1968).
$339.99
Bilstein Style Car Jack, 356/911/912 (56-71)
Part Number: 644.722.010.00
Bilstein style car jack for 356A T1 (1956-1957), 356A T2/356B T5 (1958-1961), 356B T6/C (1962-1965), 911/912 (1965-1968) (1971) models. These authentic reproduction jacks are made in Italy.
$717.90
Bilstien Jack Shaft Rubber Strap
Part Number: SMC.721.011.10
It's used on the early 914 jacks, as well as some 911, and 356. This rubber strap was never available without the jack. Concours guys were selling these for as much as $25 each before we started making them.
$8.97
On Sale
Camshaft Holder Tool, 911 (65-81)
Part Number: T52.287.017
Camshaft holder tool for 911 (1965-1981) models.
$62.75
Chassis Dolly Adapter, 356 (50-65)
Part Number: SIC.356.ADA.PT
Stoddard chassis dolly adapter for all 356 (1950-1965) models.
$209.25
Chassis Dolly, 911/912 (65-89)
Part Number: SIC.911.DOL.LY
Stoddard chassis dolly for 911 and 912 (1965-1989) models.
$779.95
Complete Engine Stand
Part Number: P201.313.215
Complete engine stand will safely hold all 356, 911, 912, 914 and 930 models with the flywheel bolted to the engine (up to 3.6L). It includes the holding fixture(#P201), heavy duty stand(#P313) and flywheel lock(#P215).
$774.95
Compression Tester Kit
Part Number: 56.67
This compression tester kit measures cylinder compression to accurately diagnose any engine problems.
$44.60
Crankcase Vacuum Measurement Tool
Part Number: 10.0881.001
Measures crankcase vacuum to diagnose possible false air leaks (low vacuum) and possible air oil separator failure (high vacuum). Each tool is complete and ready to use for the models specified. Includes system overview and facts for diagnosing many different crankcase vacuum related issues. Also includes info for on-line technical support. For Porsche Boxster/Cayman 1997-2008 & 911 Carrera 1999-2008.
$459.00
Crowfoot Wrench, 46mm
Part Number: T52-287-446
Crowfoot wrench to install and remove cam nuts. 46mm.
$172.98
CV Joint Hex Socket, 12 Point
Part Number: SMC.067.096
Twelve point hex socket (8mm) for CV joints.
$14.00
CV Joint Hex Socket, 6 Point
Part Number: SMC.067.097
Six point hex socket (6mm) for CV joints.
$14.00
Dial Gauge Holder
Part Number: P240
Dial gauge holder to measure the end play of the crankshaft flywheel and pulley. This tool can also be used to measure clearances and run out. Fits Porsche and VW models with and air cooled engine.
$115.29
Distributor Drive Puller Tool (50-76)
Part Number: 79150
Distributor drive puller tool fits from 1950-1976.
$79.50
Double Open Ended Wrench, 10mm x 11mm
Part Number: 999.195.012.02
German made double open ended wrench, 10mm x 11mm.
$19.80
Double Open Ended Wrench, 12mm x 13mm
Part Number: 999.195.013.02
German made double open ended wrench, 12mm x 13mm.
$22.44
Double Open Ended Wrench, 14mm x 15mm
Part Number: 999.195.014.02
Double open ended wrench, 14mm x 15mm.
$16.83
Double Open Ended Wrench, 17mm x 19mm
Part Number: 999.195.015.02
German made double open ended wrench, 17mm x 19mm.
$22.52
Double Open Ended Wrench, 8mm x 9mm
Part Number: 999.195.011.02
German made double open ended wrench, 8mm x 9mm.
$14.93
Engine Stand Flywheel Lock
Part Number: SMC.215
Needed to secure the crank shaft from rotating during R&R OF MOTOR. Used in conjunction with toll# P 201. Where flywheel lock bolts into a machined channel.
$86.44
Engine Stand Heavy Duty Clamp
Part Number: P 313
Designated to carry the full weight of the air-cooled engine. This clamp is properly suited for a work bench.
$432.69
Engine Stand Holding Fixture
Part Number: P 201
This exact reproduction engine stand will safely hold all 356, 911, 912, 914 and 930 models with the flywheel bolted to the engine (up to 3.6L). It features a 360 degree swivel mounting collar for a floor stand (not included).
$312.41
Engine Stand w/ Clamp
Part Number: SMC.000.003
Grey engine stand with clamp. Designated to carry the full weight of the air-cooled engine. This clamp is properly suited for a work bench.
$396.95
Factory Jack
Part Number: 911.721.011.04
Replace that stolen, worn or rusty jack with this genuine jack. It's easy to operate and easily fits into jack outlets in car to prevent damaging the car.
$178.99
Factory Jack Felt Strip
Part Number: 911.556.208.02
Factory jack felt strip.
$1.15
Factory Jack, 911/930
Part Number: USED.721.011
Looking for the correct jack for your early 911/930?
$295.00
Fan Pulley Wrench, 356C/912 (64-69)
Part Number: 999.571.001.02
Silver generator and fan pulley wrench for 356C and 912 (1964-1969) models.
$28.41
Fan Pulley Wrench, 911(65-74)/914-6 (70-72)
Part Number: P208
SIR TOOLS pulley Wrench needed for securing the generator from rotating during R&R of pulley or fan belt.
$86.44
Fan Pulley Wrench, 911(65-74)/914-6(70-72)
Part Number: 911.721.702.00
All Porsche factory tool kits included this pulley holding wrench to be used in conjunction with the box wrench when loosening the alternator nut to replace the v-belt. It fits all 911 models with 2.0, 2.2 and 2.4 engines.
$35.06
Feeler Gauge (.004'')
Part Number: P213
Feeler gauge holder and one blade (.004") needed for correct adjustment of valve clearance. Come exclusively as shown here with its correct shape for the contour of your hand. Applicable for 356, 911, 912, 912-6 and 930 models.
$14.43
Flywheel Lock Tool (50-76)
Part Number: UN.120.1100
Flywheel lock tool fits from 1950 through 1976.
$22.95
Four Way Dashboard Tool
Part Number: SMC.935.701
Four way dashboard tool used to install and remove switch rings.
$49.16
Golde Sunroof Tool
Part Number: SMC.564.053.00
High quality reproduction sunroof tool made from 300 series stainless steel.
$46.75
Hazet Battery Brush
Part Number: 4650-4
Battery brush and pole for all years and models.
$28.95
Hazet Brake Caliper Cleaning Brush, Brass
Part Number: 3-1-4968
Hazet brake caliper cleaning brush with brass bristles for removing brake dust and dirt in aluminum brake calipers. This narrow version with a plastic handle is 225mm in length. For use on all years and models.
$25.40
Hazet Brake Caliper Cleaning Brush, Steel
Part Number: 2-1-4968
Hazet brake caliper cleaning brush will steel bristles for removing brake dust and dirt in calipers. This narrow version with a plastic handle is 225mm in length. For use on all years and models.
$17.23
Hazet Breaker Bar, 1/2'" Drive
Part Number: 914-15
Hazet breaker bar with two component handle. Polished chrome finish. Measures 396mm in length. 1/2'' drive.
$105.01
Hazet Breaker Bar, 1/2'" Drive
Part Number: 914-18
Hazet breaker bar with two component handle. Polished chrome finish. Measures 472mm in length. 1/2'' drive.
$115.52
Hazet Breaker Bar, 3/8" Drive
Part Number: 8814
Hazet breaker bar with two component handle. Polished chrome finish. Measures 250mm in length. 3/8'' drive.
$74.97
Hazet Decal Set
Part Number: SMC.701.021.00
Set of Hazet decals for the wrenches in 356 (1950-1955), 356A (1955-1959) and 356B (1960-1963) tool kits. Seven decals total. Three different sizes included.
$8.75
Hazet Hose Clamp Pliers with Cable
Part Number: 798-16
To remove and install spring type hose clamps with parallel ends.
$268.88
HAZET Nozzle Adjusting Tool
Part Number: 4850-1
The telescopic handle can be used to demonstrate the jet of the nozzles to the window.
$20.10
Hazet Wrench Set
Part Number: SMC.004.002.01
Hazet Vanadium chrome wrench set. This new, German made, wrench set is perfect for your 356, 912 or 911 tool kit.
Set consists of: 17/19mm, 14/15mm, 12/13mm, 10/11mm and 8/9mm.
Was: $78.71
Now: $69.95
On Sale
Hockey Puck/Jack Pad
Part Number: 55.2620.100
A MUST FOR EVERY GARAGE! These multi-use hockey pucks are most commonly used as vehicle lift pad, drivetrain stand shim, underneath air compressor and cabinet, drilled and used as custom motor mounts, etc. These regulation hockey pucks are made from durable vulcanized rubber and can be reused many times depending on the application.
$2.95
Hubcap Rivet Installation Tool
Part Number: SMC.68.120
Now you can install your new hubcap clips correctly with this new tool. Simply clamp the mandrel into a standard bench vice, and peen rivets with a hammer and punch.
$26.41
Inner Pulley Holding Wrench, all 356's 911/912 (50-69)
Part Number: 644.571.002.03
Inner pulley holding wrench for 356, 356A, 356B, 356C, 911 and 912 models (1950-1969).
$24.50
Jack Pad, 356/912/911/914/930
Part Number: SMC.559.149.20
Jack pad for all 356's (1950-1965), 911 (1965-1989), 912 (1965-1969), 914-4 (1970-1976), 914-6 (1970-1972) and 930 (1976-1989). Designed for use with hydraulic floor jack and it is inserted into the jack receiver.
$22.41
Jack Shaft Rubber Protector 20
Part Number: 644.722.011.00
Jack shaft rubber top for 356A, 356B, 356C, 911 and 912 models.
$14.95
KLEIN Flat Blade Screw Driver, 356C/911/912 (64-68)
Part Number: 999.191.002.11KLEIN flat blade screw driver for 356C (1964-1965) and 911/912 (1964-1968) models.
$167.51
KLEIN Screw Driver, Phillips, 356C/911/912 (64-68)
Part Number: 900.137.001.03Phillips KLEIN screw driver for 356C, 911, and 912 (1964-1968) models.
$167.51
Klein Spark Plug Wrench, 911/914-6 (66-73)
Part Number: SMC.012.203.ACurrently unavailable
$76.41
Lug Nut Tie Down Set
Part Number: 911822
CURRENTLY IN PRODUCTION
When trailering your car use them in place of lug nuts. Made of superior strength steel and torqued to the same specifications as the standard lug nuts, 90 Ft Lbs. Works on all 5 stud pattern wheels.
$149.50
Messko Tire Air Gauge Leather Pouch
Part Number: SMC.000.953
Reproduction 356A, 356B, 356C Messko leather pouch.
$20.34
Messko Tire Air Gauge Leather Pouch Black
Part Number: SMC.200.005
Reproduction Messko leather pouch.
Was: $42.48
Now: $26.31
On Sale
Messko Tire Air Gauge, Dual Dial
Part Number: SMC.600.002
CURRENTLY UNAVAILABLE

$129.50
Messko Tire Air Gauge, Single Dial
Part Number: SMC.600.004 SM
No longer available
$129.50
Motometer Tire Air Gauge
Part Number: 624.003.1025Motometer tire pressure gauge with 45mm face. 8-64 Psi, 0.5-4.5 bar. Includes case.
$47.43
Motometer Tire Air Gauge
Part Number: 911.722.201.02
MOTOMETER tire air gauge for early Porsche models. This is a great addition to your factory tool kit.
$65.12
Oil Filter Wrench
Part Number: 000.721.920.40
Oil filter wrench. 3/8'' drive.
$40.90
Oil Seal Arbor, Crankshaft Side
Part Number: P216
Oil seal arbor to install the oil seal on the pulley side of the crankshaft for 911 models (1965-1989).
$163.36
Oil Seal Arbor, Flywheel Side
Part Number: P215
Oil seal arbor to install the oil seal on the flywheel side of the crankshaft for 911 models (1965-1977).
$297.98
Piston Wrist Pin And Circlip Installation Tool
Part Number: 10.0678.106
Piston wrist pin and circlip installation tool. Includes storage case & instruction book.
$1,702.62
Porsche Motorsport Hazet Tool Set
Part Number: SMC.810.06
Limited edition Porsche Motorsport Hazet 6-piece set toolset that includes (4) Slotted Screwdrivers and (2) Phillips Screwdrivers. Each tool has a black and white handle inscribed with "Porsche Motorsport", non-slip 3-component handle for high power transmission. The tools also contain a hanging hole in the handle for easy storing and matte chrome plated blade with a burnished tip.
$42.85
Porsche Shop Towel Set
Part Number: 644.721.915.01
Porsche Shop Towel Set. Set includes Five Cotton Cloth Towels with the correct Porsche script woven into the cloth. This once hard to find product is now available and the perfect addition to your toolkit!
$21.99
Radio Installation Kit
Part Number: SMC.000.444
CURRENTLY UNAVAILABLE
This is a 32 piece stereo/navigation installation tool kit covers almost all OEM car stereo systems for the last 20 years along with popular systems from Becker, Clarion, Kenwood, Sony, Grundy and Blaupunkt. Includes a custom blow molded case.
$84.92
Red Handled Screw Driver Set
Part Number: SMC.012.025
This European made, red handled screwdriver set includes one #2 Phillips head and one #4 flat head screwdriver. Often missing from tool kits, these screw drivers make a great replacement for the impossible to find originals.
$67.15
On Sale
Screw Driver Set, 911/914-6/930
Part Number: 911.721.107.02
Screw driver set for 911, 914-6 and 930 models. Measures 21mm.
$48.31
Socket Wrench, 911/912 (65-69)
Part Number: 999.571.030.03
Socket wrench for 911 and 912 (1965-1969) models.
$71.25
Spark Plug Gauge, Bosch
Part Number: NLA.721.681.00
CURRENTLY UNAVAILABLE
Bosch spark plug gauge.
$25.10
Spark Plug Wrench with Allen Key, 911 (65-73)
Part Number: SMC.065.71
Spark plug wrench with allen key set for 911 models. Years 1965-1973. This high-quality set is made of metal and in the correct finish of the tool kits used on 911's (1965-1973).
$105.60
Stud Remover Set - 4 Piece, Metric
Part Number: 6987
Designed and tested to reach studs in difficult work areas. 3/8" drive for 6 mm and 8 mm stud sizes, and 1/2" drive for 10 mm and 12 mm stud sizes. Housed in a blow-molded storage case.
$77.47
Tenax Spanner Tool, All 356's/911/912 (50-73)
Part Number: 999.591.607.13
Tenax spanner tool for all 356 (1950-1965) and 911/912 (1965-1973) models.
$2.18
Tie Rod End Puller Tool
Part Number: 910673
Designed for Porsche tie rods; our thin wrench gets in where others cannot. Use the 46mm spanner for removing and installing tie rods. It does not work for 911 Turbo.
$151.92
Tire Pressure Gauge
Part Number: 911.722.202.00
A tire pressure gauge is an essential piece of kit for every classic Porsche. In the 1960s and 70s, the tire pressure gauge was included in the tool bag of every new vehicle, and it is now available to buy again.
$73.29
Tool Kit , Updated Version, 911/912/914-6/930
Part Number: PCG.930.721.10
Replacement complete tool kit. This kit is the genuine updated version of the original tool kit.
$598.32
Tool Kit Bag, 911/912 (65-68)
Part Number: SMC.721.010.05
Black, high quality, reproduction tool kit bag for 911 and 912 models.
$85.50
Tool Kit Bag, 911/912/914-6 (69-73)
Part Number: SMC.721.010.04
Excellent reproduction tool kit bag for 911(1969-1973, 912(1969) and 914-6(1970-1972) models.
$99.69
Tool Kit Pliers, 356C/911/912 (64-68)
Part Number: 999.107.003.00
This is an exact replica of the original 6 1/2"' long pliers. Perfect for any concours!
$99.50