Part Number: 901.361.012.05
This set of hard-to-find 911R rear wheels are the quintessential racing wheel supplied by Porsche from 1967-1971. It's estimated that only a couple thousand were made for the limited Porsche 911R series of cars - only 23 were made. These forged, aluminum alloy Fuchs measure 7" wide by 15" with the extra 1" added on the inside making them unique to these models - compared to production 911S deep dish 6" by 15" wheels. Strong and light, these rear wheels are highly sought after for their uniqueness but high quality as well.

Part Number: SMC.361.10
Perhaps the coolest wheel locks on the market! These locks look just like standard lug nuts. The secret? These lug nuts have seven sides (as opposed to the standard six). The special socket required to install/remove these locks is included.

Part Number: 209185
Flat spot reducing tire mat for vehicles standing or parked for long periods of time.

Part Number: 1641300112
Currently unavailable

Part Number: 911.361.016SET
Set of 4 refurbished wheels. Professionally refurbished to OE finish. Center cap not included. Please call us with any questions.

Part Number: 911.361.022SET
Set of 4 refurbished wheels includes two 7j X 15 and two 6j X 15. Ready to be installed and enjoyed! Professionally refurbished to OE finish. Center cap not included. Please call us with any questions.

Part Number: 911.361.021SET
Set of 4 refurbished wheels includes two 8j X 15 and two 7j X 15. Ready to be installed and enjoyed! Professionally refurbished to OE finish.

The pictured wheel set is in the popular 911 RS or "frosty" finish but the wheels can be refurbished to any style. Please call us with any questions.

Part Number: MX160015A
MAXILITE replica replacement Fuchs style wheel, 6'' x 15'', offset ET 36, PCD 5 x 130. Fits 356C/SC (1963-1965), 911 and 912 (1965-1977) models.

Part Number: MX170015A
MAXILITE replica replacement Fuchs style wheel, 7'' x 15'', offset 23.3, PCD 5 x 130. Fits 911, 911SC, 911 Carrera (2.7, 3.0, 3.2), 930 Turbo, 914-6 and 944 (1970-1989) models without any modification needed.

Part Number: MX170016A
MAXILITE replica replacement Fuchs style wheel, 7'' x 16'', offset 23.3, PCD 5 x 130. Fits 911SC, 911 Carrera (2.7, 3.0, 3.2), 930 Turbo, 914-6 and 944 (1977-1989) models.

Part Number: MX180015RA
MAXILITE replica replacement Fuchs style wheel, 8'' x 15'', offset 10.6, PCD 5 x 130. Fits 911SC, 911 Carrera (2.7, 3.0, 3.2), 930 Turbo and 944 (1977-1989) models without any modification needed.

Part Number: MX190015RA
MAXILITE replica replacement Fuchs style wheel, 9'' x 15'', ET 15, hole circle 5 x 130. Fits 911SC, 911 Carrera (2.7, 3.0, 3.2) and 930 Turbo (1977-1989) models.

Part Number: SMC.410.003
Soft wheel lock nut socket. Fits all Porsche lock nuts manufactured from 1950 to 1998. Includes plastic sleeve to protect the surface around the bolt. Measures the standard 19mm. Specially recommended for alloy nuts.

Part Number: SMC.000.024.26
Tire and mount.

Part Number: 997.652.055.00
Genuine tire compressor for 911, 930, 924, 928 and 944 (1970-1995) models.

Part Number: PCG.044.610.00
Tire protector, set of four, for tires up to 255 mm wide.

Part Number: PCG.044.610.10
Tire protector, single, for tires up to 255 mm wide.

Part Number: SMC.182.04.SET
JÖRG Auto Parts Titanium lug nut set (20). Made for air-cooled Porsche years 1968-1998.

Part Number: SMC.361.013.10USED
CURRENTLY UNAVAILABLEUsed painted 5 lug wheel and tire set. Measure 15'' x 4.5''.

Part Number: PCG.044.400.00
Valve cap for tire protector.

Part Number: SMC.111.000
Vredestein classic tires.

Part Number: 900.265.001.51
Wheel Valve Stem, TR-413, Black Rubber, 42.5 mm Length.

Part Number: SMC.968.SET
Dress your Porsche with out breaking the bank! These wheel set (4) are very accurate reproductions of the popular period-correct fuchs wheel.

Part Number: SMC.970.SET
Dress your Porsche with out breaking the bank! These wheel set (4) are very accurate reproductions of the popular period-correct fuchs wheel.

Part Number: SMC.971.SET
Dress your Porsche with out breaking the bank! This polished wheel set (4) is a very accurate reproduction of the popular period-correct fuchs wheel.

Part Number: SMC.969.SET
Dress your Porsche with out breaking the bank! These wheel set (4) are very accurate reproductions of the popular period-correct fuchs wheel.

Part Number: 911.361.016.90
New 5 1/2j" x 14" Fuchs wheel for 912 and 911 models. Offset is 41. Call or email us with your Porsche wheel needs. Center cap not included.

Part Number: 911.361.020.10
Fuchs wheel for 911 models. Offset is 36. Call or email us with your Porsche wheel needs. Center cap not included.

Part Number: 911.361.020.03New 9j"x 15" Fuchs wheel. Offset is 3. Wheel can be used in other 911 models. Center cap not included.

Part Number: 911.362.119.00
New 9j" x 16" Fuchs wheel for 911, 912, 930 and 944 models. Offset is 15. Call or email us with your Porsche wheel needs. Center cap not included.

Part Number: 911.361.021.00
CURRENTLY UNAVAILABLE

Part Number: SIC.361.013.20
CURRENTLY OUT OF STOCK, DUE BACK FEBRUARY 2019Classic steel brake wheels pressed from original German tooling for 356, 911 and 912 models. These chromed wheels are 4 1/2" x 15" and are DOT approved.

Part Number: USED.361.20
Used classic steel brake wheel pressed from original German tooling for 356, 911 and 912 models. These chromed wheels are 4 1/2" x 15" and are DOT approved.

Part Number: SIC.361.022.20
CURRENTLY OUT OF STOCKClassic steel brake wheels pressed from original German tooling for 911 and 912 models. These chromed wheels are 5 1/2" x 15" and are DOT approved.

Part Number: SIC.361.021.20
CURRENTLY OUT OF STOCKClassic steel brake wheels pressed from original German tooling for 356, 911 and 912 models. These chrome wheels are 6" x 15" and are DOT approved.

Part Number: SIC.361.013.10
CURRENTLY OUT OF STOCK, DUE BACK FEBRUARY 2019 Classic steel brake wheels pressed from original German tooling for 356, 911 and 912 models. These painted wheels are 4 1/2" x 15" and are DOT approved.

Part Number: SIC.361.022.10
CURRENTLY OUT OF STOCKClassic steel brake wheels pressed from original German tooling for 356, 911 and 912 models. These painted wheels are 5 1/2" x 15" and are DOT approved.

 

Part Number: SIC.361.021.10
CURRENTLY OUT OF STOCKClassic steel brake wheels pressed from original German tooling for 356, 911 and 912 models. These painted wheels are 6" x 15" and are DOT approved.

Part Number: 901.361.013.23
Looking for new wheels for your Porsche? No need to wait several weeks for your wheels to be refinished. Wheel is ready to be installed and enjoyed!

Part Number: 911.361.022.20
Looking for new wheels for your Porsche? No need to wait several weeks for your wheels to be refinished. Wheel is ready to be installed and enjoyed!

Part Number: 901.361.013.03
Looking for new wheels for your Porsche? No need to wait several weeks for your wheels to be refinished. Wheel is ready to be installed and enjoyed!

Part Number: 911.361.022.00
Looking for new wheels for your Porsche? No need to wait several weeks for your wheels to be refinished. Wheel is ready to be installed and enjoyed!

Part Number: 911.361.023.40
Cookie cutter wheel, 6'' x 15''.

Part Number: 911.361.023.54
Looking for new wheels for your Porsche? No need to wait several weeks for your wheels to be refinished. Wheel is ready to be installed and enjoyed!

Part Number: HRDRM
H&R wheel spacer set with bolt pattern 5/130 center bore 71.6 stud / 14x1.5 thread . Fixed Studs are included. Extended wheel bolts are sold seperately. Two sets needed per car.

Part Number: HRDR
Currently unavailable

Part Number: HRDRS
H&R wheel spacer set with bolt pattern 5/130 center bore 71.6 stud / 14x1.5 thread. Studs are NOT included. Two sets needed per car. CLICK TITLE FOR TYPES AVAILABLE.

Part Number: SMC.410.010
JÖRG Auto Parts 5 lug wheel spacer for 356C, 912, 911, 924, 944, 968 and 928 models with 5 x 130 lug pattern in 5mm, 8mm and 12mm sizes. High-quality aluminum spacer. Fits between brake disc hub and wheel. Ideally for spacing the wheel out to fender for more of a fitted look.

Part Number: 930.331.611.06
28mm thickness rear wheel spacer on 930 models (1978-1989).

This wheel spacer is commonly used with other models and years as well.

Part Number: 901.352.413.00
7mm thickness rear wheel spacer for the left or right side on 911 and 912 models (1965-1973).

This wheel spacer is commonly used with other models and years as well.

Part Number: SMC.410.012
5 bolt only wheel adapter. The adapter is fitted between the hub and wheel. Use the same wheel nuts to fit the wheel. Measures 32mm (1-1/4").

Part #: SMC.410.013

5 bolt only wheel adapter. The adapter is fitted between the hub and wheel. Use the same wheel nuts to fit the wheel.

Part Number: 911.721.011.04
Replace that stolen, worn or rusty jack with this genuine jack. It's easy to operate and easily fits into jack outlets in car to prevent damaging the car.

Part Number: 644.722.010.00
This NEW, updated, genuine Porsche jack fits 356, 356A, 356B, 356C, 911 and 912 models (1950-1968).

Part Number: 644.559.801.00
Excellent quality hubcap crest with correct red bars.

Part Number: 901.361.301.04
Disc brake hubcap without the Porsche crest. Fits all steel disc brake wheels.

Part Number: SMC.361.031.01
Disc brake hubcap with raised chrome Porsche crest. Fits 356C (1964-1965), 911 and 912 (1965-1973) models with steel wheels.

Part Number: 644.361.031.00
Excellent reproduction disc brake hubcap with gold plated enamel crest for 356C, 356SC and 912 models.

Part Number: 901.361.032.02
These carefully painted center caps will complement your Fuchs wheels and make your early Porsche look period correct.

Part Number: 901.361.032.01
These carefully polished center caps will complement your polished or chromed wheels.

Part Number: 901.361.032.00
Silver center cap for 911, 912 and 914 models (1965-1973). 66mm wheel center.

Part Number: SOW.911.038.11
Black center cap with crest for 911, 930, 914, 912E, 944 models (1965-1989). Four required.

Part Number: 911.361.032.00
Silver finish center cap for alloy wheels on 911, 912E, 930 and 944 models. Fits 70mm center cap opening on wheel.

Part Number: PCG.559.801.00
Genuine hubcap crest with correct red bars.

Part Number: 901.559.801.01
Chrome hubcap crest for 911 and 912 models (1965-1968). Clips are included.

Part Number: 905952
No longer available

Part Number: SMC.182.36.SET
Black lug nut set (20) for Fuchs wheels. It fits 911, 912, 930, 924 (5-Lug), 928, 944, 968, 914, C2,C2, S4 (1967-1998).

Part Number: SMC.182.02.SET
Silver finish lug nut set (20) for Fuchs wheels. It fits 911, 912, 930, 924 (5-Lug), 928, 944, 968, 914, C2,C2, S4 (1967-1998).

Part Number: 999.182.003.36
Black lug nut for Fuchs wheels. Fits 911, 912, 930, 924 (5-Lug), 928, 944, 968, 914, C2,C2 and S4 (1967-1998) models.

Part Number: SMC.182.003.36
Chrome finish alloy lug nut for Fuchs wheels fits models from 1967 to 1989.

Part Number: 999.182.001.02
Natural finish Fuchs wheels alloy lug nut.

Part Number: N.020.112.1
Open-ended lug nut for all steel wheels fits all Porsches starting in 1950 to 1986.

Part Number: SMC.020.112
Steel open-ended lug nut.

Part Number: 928.361.306.03
Porsche Wheel Nut Lockable Without Lock , 928.361.306.03 Description: Wheel Nut Lockable Without Lock , (4 Suggested)(-91)(Carrera 2/4)

Part Number: SMC.816.45.SET
Currently unavailable

Part Number: 993.361.057.00
Wheel lock set fits 356, 911, 912, 911 Turbo, 964, 928, 968 and 993 models (1950-1998).

Part Number: SMC.900.413.01
Set of four chrome valve stems. Perfect for all models!

Part Number: PNA.705.003.02
Standard size rubber tow hitch cover for all models capable of being fitted with a tow hitch. Black with silver crest.

Part Number: 644.361.202.10
Original period correct valve stem cap set.

Part Number: PNA.705.001.99
Fits any standard air valve stem!

Part Number: PNA.705.002.00
These color valve stem caps are designed to compliment and add that finishing touch to your wheels. Fits any standard air valve stem.

Part Number: 000.044.601.00
Complete valve stem set with crest caps for all Porsche models.

Part Number: SMC.721.935.10
Now you can remove your Porsche hubcaps or center caps without damaging them.

Part Number: SMC.68.120
Now you can install your new hubcap clips correctly with this new tool. Simply clamp the mandrel into a standard bench vice, and peen rivets with a hammer and punch.