Classic European Auto Parts
1.888.986.4466
+1.323.593.4300 (Outside U.S.)
Sales@SierraMadreCollection.com
Menu

> Maintenance > Tools

10K Volt Flat Blade Screw Driver, 911/912/914-6 (69-73)
Part Number: 999.191.002.01
Limited quantity
$155.54
3M Electrical Tape
Part Number: 16578
General purpose vinyl insulating tape with excellent resistance to abrasion, moisture, alkalies, acid, copper corrosion, and varying weather conditions. Can be used as a primary electrical insulation for all wire and cable splices rated up-to 600 volts. Measures 3/4in wide x 60ft long x .007in thick.
$4.59
3M Strip Calk, Black, 1 Ft.
Part Number: 051135-08578
3M™ Strip-Calk is a soft butyl rubber caulking material that quickly and permanently fills all types of seams, joints and openings – long-lasting auto body maintenance and repair in much less time.
$22.00
9191 Camshaft Securing Tool, 911 (80-89)
Part Number: 000.721.202.00
9191 camshaft securing tool used to adjust the valves or set the cam timing. For 911 (1980-1989) models.
$88.75
Alternator Pulley Tool Kit
Part Number: SMC.400.024.1
This alternator pulley kit is used to test, remove and install overrunning alternator pulleys. This kit fits all models.
$304.47
Aluminum Racing Jack, Two Ton
Part Number: 1532
Dual pump pistons - five pumps to maximum height of 18 inches. Low profile. Aircraft-grade billet aluminum provides strength with maximum weight savings. Two-piece, 45" long handle snaps together for quick set up. Removable, rubber saddle pad protects vehicle and prevents slipping. Meets ANSI PALD, Part 10. 3-1/2" min height. 18" max height. 45" handle length.
$452.43
Autolampen Light Bulb Box, 356 Pre-A/356A
Part Number: AL01
Empty reserve light bulb box stamped “Autolampen”. The box is 115 mm width, 95 mm depth and 50 mm height. Limited quantities.
$59.74
Axle Strap Set
Part Number: SMC.000.172
Axle strap set.
$24.05
Ball Joint Removal Tool
Part Number: 000.721.280.20
This tool makes removal of ball joints easy. It fits starting in 1969.
$110.50
Baum Tools® Camshaft Alignment Tool Set (02-08)
Part Number: B9685KIT
Baum Tools® Camshaft Alignment Tool Set.
$334.34
Baum Tools® Camshaft Alignment Tool Set (97-01)
Part Number: B9612K
Baum Tools® Camshaft Alignment Tool Set.
$891.75
Bilstein Front Shock Absorber Gland Nut Tool, Max. Drehmoment, 140 Nm, MS 08/6
Part Number: SMC.006.21
Bilstein front shock absorber gland nut tool, Max. Drehmoment, 140 Nm, MS 08/6. Installs and removes front shock absorber special retention nut.
$21.95
Brake Fluid Tester
Part Number: SMC.004.000
Test the water content of gylcol-based brake fluid with this pen sized tester.
$101.95
Camera Mount
Part Number: 883159
Camera mount for all Porsche models.
$125.95
Camshaft Holder Tool, 911 (65-81)
Part Number: T52.287.017
Camshaft holder tool for 911 (1965-1981) models.
$62.75
Carburetor Float Level Gauges, 911/914
Part Number: SMC.100.948.01
For all Weber carburetors.
$38.50
CIS injection Mixture Adjusting Wrench
Part Number: 903072

Works up to mid 1980s and even some early 1990s depending on the model. It works on all 930 models.
$6.94
Clutch Alignment Tool, All 356's (50-65)
Part Number: CT 5302
Clutch alignment tool for all 356 models.
$7.43
Compression Tester Kit
Part Number: 56.67
This compression tester kit measures cylinder compression to accurately diagnose any engine problems.
$44.60
Crankcase Vacuum Measurement Tool
Part Number: 10.0881.001
Measures crankcase vacuum to diagnose possible false air leaks (low vacuum) and possible air oil separator failure (high vacuum). Each tool is complete and ready to use for the models specified. Includes system overview and facts for diagnosing many different crankcase vacuum related issues. Also includes info for on-line technical support. For Porsche Boxster/Cayman 1997-2008 & 911 Carrera 1999-2008.
$459.00
CV Joint Hex Socket, 12 Point
Part Number: SMC.067.096
Twelve point hex socket (8mm) for CV joints.
$14.00
CV Joint Hex Socket, 6 Point
Part Number: SMC.067.097
Six point hex socket (6mm) for CV joints.
$14.00
Dashboard Bezel Tool, All 356's (50-65)
Part Number: SMC.000.356.01
Dashboard bezel tool for all 356 (1950-1965) models.
Was: $14.11
Now: $9.97
On Sale
Distributor Drive Puller Tool (50-76)
Part Number: 79150
Distributor drive puller tool fits from 1950-1976.
$79.50
Door Striker Hex Socket 1/2'' Drive
Part Number: SMC.531.005.55
Door Striker Hex Socket 1/2" Drive. After years of not being removed or turned, it takes a specially tough socket to loosen door striker plates. Our 12-point, 8MM hex socket is the perfect tool.
$46.85
Double Open Ended Wrench, 10mm x 11mm
Part Number: 999.195.012.02
German made double open ended wrench, 10mm x 11mm.
$19.80
Double Open Ended Wrench, 12mm x 13mm
Part Number: 999.195.013.02
German made double open ended wrench, 12mm x 13mm.
$22.44
Double Open Ended Wrench, 14mm x 15mm
Part Number: 999.195.014.02
Double open ended wrench, 14mm x 15mm.
$16.83
Double Open Ended Wrench, 17mm x 19mm
Part Number: 999.195.015.02
German made double open ended wrench, 17mm x 19mm.
$22.52
Double Open Ended Wrench, 8mm x 9mm
Part Number: 999.195.011.02
German made double open ended wrench, 8mm x 9mm.
$14.93
Drive Belt Installation Kit
Part Number: SMC.559.311
This drive belt installation and removal tool kit works on self-tensioning, stretch type belts.
$203.49
Drive Belt Kit, Boxster/Cayman (99-08)
Part Number: ADK0029P
Drive belt kit for Boxster and Cayman (1999-2008) models.
$483.63
Engine Stand Flywheel Lock
Part Number: SMC.215
Needed to secure the crank shaft from rotating during R&R OF MOTOR. Used in conjunction with toll# P 201. Where flywheel lock bolts into a machined channel.
$44.95
Engine Stand Holding Fixture
Part Number: P 201
This exact reproduction engine stand will safely hold all 356, 911, 912, 914 and 930 models with the flywheel bolted to the engine (up to 3.6L). It features a 360 degree swivel mounting collar for a floor stand (not included).
$312.41
Engine Stand w/ Clamp
Part Number: SMC.000.003
Grey engine stand with clamp. Designated to carry the full weight of the air-cooled engine. This clamp is properly suited for a work bench.
$396.95
Engine Stand, Yoke Portion, (97-08)
Part Number: P201.996
Engine stand (yoke portion) for Boxster/Cayman (1997-2008) and 997 (1999-2008) models.
$1,221.88
Fan Pulley Wrench, 356A/356B (55-63)
Part Number: SMC.000.341
JÖRG generator and Fan Pulley Wrench, black. To properly adust or install the fan belt on the 356, it is essential to have the correct pulley wrench. For 356A, 356B.
$18.75
Fan Pulley Wrench, 911 (77-89)
Part Number: 999.571.047.02
JÖRG fan pulley wrench. It fits 1977-1989.
$44.50
On Sale
Fan Pulley Wrench, 911(65-74)/914-6 (70-72)
Part Number: P208
SIR TOOLS pulley Wrench needed for securing the generator from rotating during R&R of pulley or fan belt.
$44.95
Fan Pulley Wrench, 911(65-74)/914-6(70-72)
Part Number: 911.721.702.00
All Porsche factory tool kits included this pulley holding wrench to be used in conjunction with the box wrench when loosening the alternator nut to replace the v-belt. It fits all 911 models with 2.0, 2.2 and 2.4 engines.
$35.06
Flat Blade Screw Driver
Part Number: 999.191.002.02
High quality wooden handle screw driver. It measures 235mm by 26mm.
$56.74
Flat Blade Screw Driver (Pulley)
Part Number: 999.191.002.10
High quality wooden handle screw driver. It measures 265mm by 26mm.
$58.48
Flywheel Lock Tool (50-76)
Part Number: UN.120.1100
Flywheel lock tool fits from 1950 through 1976.
$22.95
Four Way Dashboard Tool
Part Number: SMC.935.701
Four way dashboard tool used to install and remove switch rings.
$49.16
Golde Sunroof Tool
Part Number: SMC.564.053.00
High quality reproduction sunroof tool made from 300 series stainless steel.
$46.75
Hazet 772/2 Wheel Wrench, 356 (50-63)
Part Number: 644.721.221.00
High quality, European made reproduction of hard to find Hazet 772/2 wheel wrench for 356 Pre-A (1950-1955), 356A (1955-1959) and 356B (1960-1963) models.
$191.25
Hazet Axle Boot Clamp Pliers
Part Number: -19356
Hazet nickle plated axle boot clamp pliers with lug holding device. 230mm length.
$229.00
Hazet Axle Boot Clamp Pliers
Part Number: 1847
Hazet axle boot clamp pliers for when a torque setting is required. This plier has a 3/8'' drive and an ergonomic 2-component handle and is 178mm in length.
$193.43
Hazet Ball Joint Puller
Part Number: 1779-1
Hazet universal ball joint puller for removing ball joint pivots. This puller has a wide clamping range, continuous height adjustment and tilting lower part. Measures 23mm at mouth opening and has a 65mm clamping range.
$130.56
Hazet Battery Brush
Part Number: 4650-4
Battery brush and pole for all years and models.
$28.95
Hazet Brake Caliper Cleaning Brush, Brass
Part Number: 3-1-4968
Hazet brake caliper cleaning brush with brass bristles for removing brake dust and dirt in aluminum brake calipers. This narrow version with a plastic handle is 225mm in length. For use on all years and models.
$25.40
Hazet Brake Caliper Cleaning Brush, Steel
Part Number: 2-1-4968
Hazet brake caliper cleaning brush will steel bristles for removing brake dust and dirt in calipers. This narrow version with a plastic handle is 225mm in length. For use on all years and models.
$17.23
Hazet Brake Caliper Piston Tool
Part Number: 4971-1
Hazet brake caliper piston tool for resetting of brake calipers without an integrated parking brake and no damage.
$272.34
Hazet Breaker Bar, 1/2'" Drive
Part Number: 914-18
Hazet breaker bar with two component handle. Polished chrome finish. Measures 472mm in length. 1/2'' drive.
$115.52
Hazet Breaker Bar, 1/2'" Drive
Part Number: 914-15
Hazet breaker bar with two component handle. Polished chrome finish. Measures 396mm in length. 1/2'' drive.
$105.01
Hazet Breaker Bar, 3/8" Drive
Part Number: 8814
Hazet breaker bar with two component handle. Polished chrome finish. Measures 250mm in length. 3/8'' drive.
$74.97
Hazet Diagonal Cutter, 145mm
Part Number: 1803M-11
Hazet lap joint, Swedish type diagonal cutters with 2 component plastic handle covers and sand-blasted and polished finished. 145mm length.
$40.29
Hazet Diagonal Cutter, 165mm
Part Number: 1803M-22
Hazet lap joint, Swedish type diagonal cutters with 2 component plastic handle covers and sand-blasted and polished finished. 165mm length.
$40.29
Hazet Door Panel Removal Pliers
Part Number: 799-4
Hazet door panel removal pliers for removing door panel clips, moulding clips and bumper cover impact strips. Measures 230mm.
$88.59
Hazet Door Panel Removal Tool
Part Number: 799-3
Hazet door panel removal tool for removing door panel clips. Measures 268mm in length and 28mm jaw opening.
$46.77
Hazet Fender Cover, 1000mm x 640mm
Part Number: 196-1
Hazet fender cover to protect your vehicle from scratches, dirt and oil during service and repairs. Uses six magnetic attachment and is suitable for most vehicles.
$91.40
Hazet Hose Clamp Pliers with Cable
Part Number: 798-16
To remove and install spring type hose clamps with parallel ends.
$268.88
Hazet Magnetic Parts Tray, 150mm
Part Number: 197-3
Hazet magnetic parts tray for storing small parts. Attach it magnetically to tool boxes or shop walls. 150mm diameter.
$16.32
Hazet Multi Purpose Drain Pan with Handles
Part Number: 197-1
Hazet multi purpose drain pan with handles, pouring spout and parts platform suitable for fluid changes and cleaning parts. Made of polyethylene. 6 liter capacity. 400 mm diameter. 100 mm height.
$21.48
Hazet Multi Purpose Drain Pan with Handles
Part Number: 197-2
Hazet multi purpose drain pan with handles, pouring spout and parts platform suitable for fluid changes and cleaning parts. Made of polyethylene. 16 liter capacity. 450 mm diameter. 180 mm height.
$66.95
HAZET Nozzle Adjusting Tool
Part Number: 4850-1
The telescopic handle can be used to demonstrate the jet of the nozzles to the window.
$20.10
Hazet Pneumatic Brake Bleeder Kit
Part Number: 1120934
This Hazet pneumatic brake bleeder kit sucks brake fluid to calipers and wheel cylinders and is designed to be used with compressed air. This kit contains (1) 750ml brake bleeder with hose and (2) 1L brake fluids refill bottles. This kit uses 180L/min air compression and 6-8 bar working pressure.
$168.30
Hazet Pneumatic Impact Wrench, 1/2" Drive
Part Number: 9012SPC
Hazet pneumatic impact wrench and 1/2" drive with ergonomically designed handle and casing for improved operation. New air motor development improves power and efficient air flow and improved pull up torque. 550 Nm recommended tightening torque. 750 Nm max tightening torque. 850 Nm max loosening torque. 7000 RPM. 6.3 bar operating pressure.
$270.30
Hazet Spark Plug Wrench, All 356's (50-65)
Part Number: HZ2505-2
Hazet spark plug wrench for 13/16" (20.8mm) spark plugs. Can be used with all 356 (1950-1965) models.
$75.10
Hazet Wrench Set
Part Number: SMC.004.002.01
Hazet Vanadium chrome wrench set. This new, German made, wrench set is perfect for your 356, 912 or 911 tool kit.
Set consists of: 17/19mm, 14/15mm, 12/13mm, 10/11mm and 8/9mm.
Was: $78.71
Now: $69.95
On Sale
Hockey Puck, 6 oz.
Part Number: 55.2620.100
Hockey puck measuring 3 inches in diameter. Weighs 6 ounces.
$2.76
Hubcap or Center Cap Remover Tool
Part Number: SMC.721.935.10
Now you can remove your Porsche hubcaps or center caps without damaging them.
$21.84
Hubcap Rivet Installation Tool
Part Number: SMC.68.120
Now you can install your new hubcap clips correctly with this new tool. Simply clamp the mandrel into a standard bench vice, and peen rivets with a hammer and punch.
$26.41
IMS Bearing Installation Tool Set
Part Number: SMC.125.001
Tool set for IMS bearing update kits #SMC.002.005 (single row) and #SMC.097.099 (double row).
$408.00
Jack Pad, 356/912/911/914/930
Part Number: SMC.559.149.20
Jack pad for all 356's (1950-1965), 911 (1965-1989), 912 (1965-1969), 914-4 (1970-1976), 914-6 (1970-1972) and 930 (1976-1989). Designed for use with hydraulic floor jack and it is inserted into the jack receiver.
$22.41
KLEIN Flat Blade Screw Driver, 356C/911/912 (64-68)
Part Number: 999.191.002.11KLEIN flat blade screw driver for 356C (1964-1965) and 911/912 (1964-1968) models.
$167.51
KLEIN Screw Driver, Phillips, 356C/911/912 (64-68)
Part Number: 900.137.001.03Phillips KLEIN screw driver for 356C, 911, and 912 (1964-1968) models.
$167.51
Lug Nut Tie Down Set
Part Number: 911822
When trailering your car use them in place of lug nuts. Made of superior strength steel and torqued to the same specifications as the standard lug nuts, 90 Ft Lbs. Works on all 5 stud pattern wheels.
$149.50
Messko Tire Air Gauge Leather Pouch
Part Number: SMC.000.953
Reproduction 356A, 356B, 356C Messko leather pouch.
$20.34
Messko Tire Air Gauge Leather Pouch
Part Number: SMC.200.005
Reproduction Messko leather pouch.
$42.48
Motometer Tire Air Gauge
Part Number: 624.003.1025
Motometer tire pressure gauge with 45mm face. 8-64 Psi, 0.5-4.5 bar. Includes a case.
$42.84
Motometer Tire Air Gauge
Part Number: 624.003.1025Motometer tire pressure gauge with 45mm face. 8-64 Psi, 0.5-4.5 bar. Includes case.
$47.43
Motometer Tire Air Gauge
Part Number: 911.722.201.02
MOTOMETER tire air gauge for early Porsche models. This is a great addition to your factory tool kit.
$65.12
Nussbaum Jumbo 7000 Double Scissor Lift
Part Number: JUMBO 7000
Double scissor lift with lifting capacity of 7,000 pounds. 4" low profile. Adjustable lifting platform length from 57 1/2" to 81". Install above ground or recessed in floor. Free passage between the scissors. Maximum utilization of workshop space. Perfect for low ceiling or narrow bay applications. Fully hydraulic system. Compact oil-submerged motor. Push button controls. No electrical or pneumatic components. Fast lifting and lowering times.
$8,654.70
Nussbaum Jumbo 9000 Double Scissor Lift
Part Number: JUMBO 9000
Double scissor lift with lifting capacity of 9,000 pounds. 4" low profile. Adjustable lifting platform length from 57 1/2" to 81". Install above ground or recessed in floor. Free passage between the scissors. Maximum utilization of workshop space. Perfect for low ceiling or narrow bay applications. Fully hydraulic system. Compact oil-submerged motor. Push button controls. No electrical or pneumatic components. Fast lifting and lowering times.
$11,092.50
Nussbaum SPL10000 Two Post Lift
Part Number: SPL10000M
ALI certified hydraulic asymmetric two post lift with a lifting capacity of 10,000 pounds. 3.5 hp integrated power unit and covered hard-chromed cylinders. 124" bay setting. Fast lifting and lowering times. Variable lowering speed with manual control lever. Mechanical security locks. Self-purging cylinders for powerful lifting and lowering. Protective coverings for column cylinders. Designed for short and long wheelbase vehicles.
$4,380.90
Oil Filter Wrench
Part Number: 000.721.920.40
Oil filter wrench. 3/8'' drive.
$40.90
Phillips Screw Driver
Part Number: 900.137.001.02
High quality wooden handle screw driver. It measures 205mm by 26mm.
$38.14
Piston Ring Compressor with Wrench
Part Number: 794-1
High strength spring steel engine piston ring compressor with wrench. Measures 60mm minimum diameter, 125mm maximum diameter and 80mm high.
$62.48
Piston Wrist Pin And Circlip Installation Tool
Part Number: 10.0678.106
Piston wrist pin and circlip installation tool. Includes storage case & instruction book.
$1,702.62
Porsche® Utility Jug w/ Shop Towel, 5 Liter
Part Number: PCG.800.703.00
Porsche® 5 liter utility jug with shop towel included.
$39.50
Power Bleeder
Part Number: 109
Black Label European bleeder with aluminum cap and swivel fitting
$74.95
Radio Removal Tool Key Set
Part Number: SMC.000.445
Simply slide into the required position to allow easy removal of your radio.
$7.95
Red Handled Screw Driver Set
Part Number: SMC.012.025
This European made, red handled screwdriver set includes one #2 Phillips head and one #4 flat head screwdriver. Often missing from tool kits, these screw drivers make a great replacement for the impossible to find originals.
$67.15
On Sale
Rivet Fastener
Part Number: 999.591.611.02
Brad type rivet fastener for all models.
$1.06
Schumacher Battery Companion Charger
Part Number: MC1
Unique 1 amp manual battery charger maintains both 6 and 12 volt batteries. Great for warming larger batteries in cold weather and features reverse connection protection for safety. Comes with battery clamps and ring connectors for greater charging flexibility.
$42.15
Screw Driver Set, 911/914-6/930
Part Number: 911.721.107.02
Screw driver set for 911, 914-6 and 930 models. Measures 21mm.
$48.31
Spark Plug Wrench
Part Number: 477.012.203.A
Spark plug wrench.
$112.50
Stubby Blade Screw Driver
Part Number: 999.191.002.20
High quality wooden handle screw driver. It measures 100mm by 30mm.
$52.41
Stubby Blade Screw Driver (Scalloped Type)
Part Number: 999.191.002.30
High quality wooden handle screw driver. It measures 100mm by 30mm.
$51.81
Stud Remover Set - 4 Piece, Metric
Part Number: 6987
Designed and tested to reach studs in difficult work areas. 3/8" drive for 6 mm and 8 mm stud sizes, and 1/2" drive for 10 mm and 12 mm stud sizes. Housed in a blow-molded storage case.
$77.47
Tire Air Compressor
Part Number: SS-PDQ/06
Don't remove your tire or wait for a tow truck again! Fix your flat in 15 minutes or less and improve your fuel economy!
$29.99
Tire Pressure Gauge
Part Number: 911.722.202.00
A tire pressure gauge is an essential piece of kit for every classic Porsche. In the 1960s and 70s, the tire pressure gauge was included in the tool bag of every new vehicle, and it is now available to buy again.
$73.29
Tool Kit Pliers, 356/356A/356B
Part Number: 999.107.002.02
These pliers have had their handles painted black and are very similar to the original pliers.
$92.85
Tow Hook & Jack Pad Combination, 911/930
Part Number: 915232
The perfect way to raise the back end without damaging the vulnerable engine case with this jack pad and tow hook combination. Made of 1020 Mild Steel, TIG welded and powder coated red.
$120.65
Tow Strap Set
Part Number: SMC.141.015
Tow strap set with steel forged hooks.
Was: $32.90
Now: $29.92
On Sale
Transmission Drain Plug Tool (56-88)
Part Number: SMC.005.773
Transmission drain plug tool with a 17mm hex and 3/8" drive for 356A (1956-1959), 356B (1960-1963), 356C (1964-1965), 911 (1965-1988), 912 (1965-1969), 914 (1970-1976), 912E (1976), 930 (1976-1988) and 928 (1978-1986) models.
Was: $5.21
Now: $4.17
On Sale
Tuning Carburetor Tool, Manometer
Part Number: T80.800.MAN
This tool is for tuning carburetor and mechanical fuel injection engines.
$199.95
Valve Adjustment Tool (50-94)
Part Number: UN.120.8895
This tool is used on valve adjustment screw. Fits from 1950 through 1994.
$67.10
Vintage Style Castrol Oil Can
Part Number: SMC.216.555
Classic Castrol Oil Cans look great in your den or garage, and are even useful for pouring oil without spilling.
$31.61
Wheel Lug Wrench, 19mm
Part Number: 999.571.045.02
Wheel Lug Wrench, 19mm.
$39.40
Windshield Trim Molding Removal Tool
Part Number: SMC.914.765.45
Windshield trim molding removal tool for all years and models.
$18.97