Classic European Auto Parts
+1.323.593.4300 (Outside U.S.)

> Replica Cars > Panels and Hardware > Hardware

356 GT Deco Molding Fasteners
Part Number: SMC.559.010.05
Fasteners for the aluminum 356 GT deco molding strip. This set includes fasteners for both the front and rear molding strips. One set needed per car.
Aero Mirror Nut, 356/356A/356B(T5)
Part Number: 644.731.007.00
Nut for Aero mirror on 356 Pre-A, 356A and 356B(T5) models.
Aluminum Rivet (4mm x 6mm)
Part Number: 900.055.010.30
Rivet for seat rail springs on 356 Pre-A, 356A and 356B(T5) models.
Beehive Bezel Retaining Screw 356/356A
Part Number: NLA.631.010.00
Bezel retaining screw for 356 and 356A models. Two required per light.
Beehive Light Bezel Screw, 356/356A
Part Number: NLA.631.4X1.2
Screw for 356 or 356A beehive light chrome bezel. 8 required per car and 2 required per light.
Bungee Cord Hardware Kit, 356/356A
Part Number: SMC.522.752.00
Hardware kit for bungee cord on 356 Pre-A and 356A models.
Bungee Cord Kit, 356/356A
Part Number: 644.522.751.00
This bungee cord kit installs in the left rear corner of the interior and holds the seat back in the upright position to keep it from flopping down when stopping. The t-bolt attaches to the sheet metal. Kit includes all hardware.
Defroster Vent Screw Kit, Speedster
Part Number: NLA.552.001.40
Complete set with 8 screws.
DEIST 2'' Eyebolt Quick Snap Kit
Part Number: 60001
Because mounting hardware can be the weak link in any belt / harness installation, Deist Safety has put a major emphasis on these components.
DEIST Flat Snap & Eyebolt Mounting Hardware Kit
Part Number: 60000
Because mounting hardware can be the weak link in any belt / harness installation, Deist Safety has put a major emphasis on these components.
Door and Rear Panel Screw Set, 911/912 (65-68)
Part Number: SMC.555.001.00
Screw set for 911 and 912 models from 1965 through 1968 only.
Door Handle & Window Crank Pin Set, All 356's (50-65)
Part Number: 900.091.001.00
Pack of four door handle and window crank pin set for all 356 (1950-1965) models. Four pins required per car.
Door Handle Mounting Screw, 356A/356B/356C
Part Number: 900.015.005.02
Mounting screw for door handles on 356A(T2), 356B and 356C models.
Door Panel Screw & Washer Set (50-65)
Part Number: 644.531.003.00
Stainless steel door panel screw and washer set for all 356 models.
Emblem Clip, 2mm (Smaller Size)
Part Number: 999.591.212.02
Clip for 2mm emblem pins for all 356's, 911, 912 models.
Was: $1.26
Now: $0.95
On Sale
Emblem Clip, 3mm (Larger Size)
Part Number: 999.591.212.01
Clip for 3mm emblem pins fits 356, 356A, 356B, 356C, 911, and 912 models (1950-1969).
Engine Grille Screw & Nuts, 356/356A/356B(T5)
Part Number: 644.512.001.00
Engine grille screw and nuts for 356, 356A and 356B(T5) models.
Fiber Washer, 356A(T2)/356B/356C
Part Number: 644.542.563.00
Fiber washer for vent mirror on 356A(T2), 356B and 356C models.
Heater Slide Screw Set
Part Number: 644.572.077.00
Heater slide screw set for all models. One set required.
Heater Slide Screw Set, all 365's (50-65)
Part Number: NLA.572.076.00
Heater slide screw set for all 356 models (1950-1965). One set per car required (8 screws).
Hood Seal Corner Piece Set, Stainless Steel, All 356's
Part Number: SMC.511.SET
Set of two stainless steel, small, metal corner pieces for all 356 models.
Horn Data Plate, Left (Single Hole)
Part Number: NLA.701.636.00
Horn data plate for the left side. Fits models 356 Pre-A/356A/356B/356C. Years 1950-1965.
Horn Data Plate, Right (Single Hole)
Part Number: NLA.701.635.00
Right horn data plate. Single hole. Fits models 356 Pre-A/356A/356B/356C. Years 1950-1965.
Horn Restoration Kit (Single hole)
Part Number: 644.635.003.00
Everything to make your original horns look like new. One kit per car.
Latch Cover & Key Lock Set
Part Number: SMC.000.840
Latch & lock set for 550 Spyder Models. Kit includes 2 front and 2 back latches. Hardware is included.
Was: $231.50
Now: $158.00
On Sale
Luggage Rack Installation Kit
Part Number: 644.801.003.00
Installation kit for Reutter and Lietz luggage rack. Spacers are not included.
Molding Trim Clip
Part Number: 999.591.302.02
Clip for trim molding.
Molding Trim Hardware Set
Part Number: 644.559.004.00
Hardware set for side trim molding on Coupes, Speedster, Convertible D and Roadster models. One set per car.
Radio Bracket, Speedster/Roadster
Part Number: NLA.645.006.00
This reproduction bracket will allow most period Blaupunkt radios to be mounted.
Rear Back Panel Hardware Set (50-65)
Part Number: 644.531.003.01
This is everything you will need to correctly install your 356 interior rear panel. Hardware kit includes nails, washers and clips. Fits all 356 models.
Was: $17.41
Now: $14.96
On Sale
Rivet, Chassis & Paint Number Plates (Small Size)
Part Number: 900.055.001.02
Rivet for chassis and paint number plates (small size).
Rivets for Coach Builders, Badges (Larger Size)
Part Number: 900.055.003.30
Rivets for Coach Builders and Badges (larger size).
Rubber Mat Snap Fasteners, All 356's/911/912
Part Number: 999.591.806.12
German made rubber mat snap fasteners for all 356's, 911, and 912 models (1950-1969).
Seat Belt Hardware Kit, Lap Belt
Part Number: FHD-1046-2
Hardware kit for lap belts belts on 356, 911 and 912 models. One kit per belt.
Seat Headrest Bracket, 356/911/912 (50-67)
Part Number: SMC.000.166
Headrest bracket with adjusting Knob. Attaching screws are included. Two required per seat.
Sun Visor Screw Set, 356B(T6)/356C
Part Number: 644.731.005.00
Sun visor screw set. One set per car.
Teardrop Bezel Retaining Screw, 356 (57-65)
Part Number: 644.631.471.00
Bezel retaining Phillips screw for 356A(T2), 356B and 356C (1957-1965) models. You will need two of them per light.
Tenax Fastener Bolt, Chrome
Part Number: 999.591.604.12
Chrome Tenax fastener bolt. Made in Germany. Measures 5mm x 10mm.
Tenax Fastener Cap, Brass
Part Number: SMC.001.949
Tenax fastener brass cap. Made in Germany.
Tenax Fastener Stud, Chrome, 356B/356C (60-65)
Part Number: 999.591.602.12
Tenax fasteners (stud only) in chrome. Clear plastic washer is included. Made in Germany.
Tenax Fasteners, Cap, Chrome
Part Number: SMC.000.949
Tenax fasteners chrome cap. Made in Germany.
Threshold Metal Strip Attachment Screw
Part Number: 900.145.041.00
Threshold metal strip attachment screw. Measures 3.5mm x 16mm.
Threshold Screw Set, #1, All 356's (50-65)
Part Number: 644.551.001.00
Threshold screw set #1 for both doors. Fits all 356 models (1950-1965). Forty four screws per set. One set needed per car.
Top Latch/Bracket Screw, 5mm x 8mm
Part Number: 900.148.008.02
Mounting screw for the Convertible D, Speedster and Roadster top latch and bracket. Measure 5mm x 8mm. Eight required.
Window Crank Spring, 356A/356B
Part Number: 644.542.473.00
Excellent reproduction window crank spring for 356A (1955-1959) and 356B (1960-1963) models.
Windshield Frame Screw Set (Speedster)
Part Number: 644.541.040.00
Proper length stainless steel screws for assembly of windshield frame to post and top latch screws.
Yellow Zinc Metric Hexagon Head Bolt Set
Part Number: SMC.012.007.11
Yellow zinc coated metric hexagon head bolt set.