BendPak 10APX PRO-Series Two-Post Car Lift – 10,000 lb Capacity | 79.5″ Lift Height | 157″ Overhead | Bi-Metric Arms | EV-Ready | ALI Certified

The Future of Two-Post Lifting

Introducing the BendPak 10APX PRO, the next evolution in professional-grade automotive lifts. Designed for mechanics who spend long hours working in challenging positions, this lift provides an ideal balance of comfort, clearance, and control. With a lifting height of 79.5 inches and an overhead beam of 157 inches, it gives ample room to work on large vehicles safely and efficiently. Built to BendPak’s legendary standards, the PRO-Series is equipped with Low-Pro arms, Bi-Metric geometry, and a 10,000-lb lifting capacity for modern performance demands.

Engineered for Professional Environments

BendPak’s PRO-Series introduces a revolutionary lift design that blends the finest qualities of modern two-post systems into a completely new engineering concept. The result is a lift capable of handling extreme workloads, heavier vehicles, and continuous shop use—while maintaining absolute precision and operator safety.

The flexible design accommodates both wide and narrow installations, letting you configure your bay to your shop’s workflow. Durability, safety, and reliability come standard, with a structure built for decades of dependable operation.

Safety Through Innovation

Every detail of the 10APX PRO is designed to minimize maintenance and service costs while maximizing uptime. Its simplified yet sophisticated architecture delivers smooth, quiet operation, lower operating expenses, and higher productivity.

Optimized for the Electric-Vehicle Era

Modern EVs add weight from battery packs, protective armor, and reinforced chassis, demanding stronger and smarter lifting solutions. The PRO-Series meets this challenge with:

• Reinforced high-tensile steel construction

• Extra-wide column spacing for better under-car access

• Low-profile arms for lifting low-clearance EVs and performance cars

• Enhanced telescoping arm movement to reach outer lift points precisely

These design features make the 10APX PRO ideal for servicing EVs, hybrids, trucks, vans, and sports cars safely and efficiently.

Revolutionary Automatic Swing Arm Restraint System (ASARS)

• Forged-steel construction delivers over 2,000 lbs of load-holding force

• 360° grip design locks arms securely to prevent unplanned movement

• Adaptive, self-adjusting mechanism handles high lateral forces

• Quick-release lever enables precise and safe arm repositioning

This patented ASARS design sets a new safety standard for heavy-vehicle servicing, providing unmatched holding strength with minimal operator effort.

Triple-Telescoping Nested Swing Arm Design

• Three-stage arms retract shorter and extend farther than traditional designs

• Patented nesting tubes allow full inner-arm retraction and greater reach

• Enables perfect lift-point alignment for vehicles of all sizes

Low-Pro Swing Arms

• Dropped-end pad receivers allow access to low chassis lift points

• Reduces risk of damage to side skirts, running boards, and underbody components

• Telescoping channels provide a shorter arm profile for superior clearance

Bi-Metric Adaptable Swing Arms

• Switch instantly between symmetric or asymmetric setups—no arm change required

• Maximizes service efficiency and reduces setup time

• Ideal for mixed vehicle fleets and varied wheelbases

Frame Cradle Pads & Adapter Options

• Heavy-duty steel construction with polyurethane-lined cradles for frame protection

• 35 mm and 60 mm diameter pins for secure integration with lift arms

• Medium (2.5″) and Tall (5″) adapter pins handle uneven underbodies and large trucks

• Designed to keep vehicles firmly in place during all lift operations

Optional WSA-100 Work Station Integration

Enhance productivity with the BendPak WSA-100 Work Station, adding air and electrical service directly to your lift.

• Four industrial-grade 120 V electrical outlets

• Two air service outlets with integrated pressure gauge & filtration system

• Hooks for power cords and tools to maintain a clutter-free workspace

• Ensures clean, dry air for pneumatic tools and tire service

Key Technical Advantages

• Dual hydraulic direct-drive cylinders for smooth, balanced lifting

• Self-lubricating UHMW polyethylene bearings for maintenance-free operation

• 3/8″ (10 mm) galvanized equalizer cables with oversized sheaves reduce fatigue

• Automatic safety locks engage every 3″ for secure height positioning

• Electric/Hydraulic HVLP power system delivers quiet and efficient performance

• ALI Certified for proven industry-standard safety compliance

BendPak 10APX PRO – Features at a Glance

• Durable powder-coat finish

• Expandable top beam for wide / narrow installation

• Double-telescoping screw pads for maximum versatility

• Padded overhead safety shutoff bar

• Single-point safety release system

• Drop-end arms for reduced pad height

• Oversized 53″ & 59″ carriages for superior strength and stability

• <70 dB operating noise level
  

Key Features

10APX Lift

• Durable powder coat finish

• Expandable top beam accommodates wide or narrow drive-thru configurations

• Double-telescoping screw pads for maximum versatility

• Padded overhead safety shutoff bar

• Exclusive Bi-Metric arm design for symmetric or asymmetric positioning

• Single-point safety release for quick operation

• Drop-end arms provide a lower pad height for low-clearance vehicles

• Dual hydraulic direct-drive cylinders for smooth, even lifting

• Oversized 53" & 59" tall carriages for superior strength and durability

• Electric / hydraulic HVLP power system for efficient and quiet performance

• Self-lubricating Dura-Glide UHMW polyethylene bearing system

• Safety locks in each column spaced every 3"

• Automatic arm restraints withstand over 2,000 lbs of side force

• 3/8" (10 mm) high-strength multi-strand galvanized steel equalizing cables

• Oversized cable sheave diameter reduces fatigue and increases cable life

• Four triple-telescoping arms for exceptional reach and flexibility

• ALI Certified for professional safety standards

WSA-100 Work Station (Optional)

• Easy to install on any two-post or four-post lift

• Four 110V GFI outlets with 20 amp industrial protection

• Dual air service outlets: one lubricated (for tire inflation) and one dry (for tools)

• Integrated regulator, filter, oiler, and pressure gauge

• Nickel-plated ball valve shutoff for durability

• Powder-coated finish for corrosion resistance

• Convenient hooks for hose and tool storage

• Keeps air and power within arm’s reach, improving workspace efficiency

Frame Cradle Pads

• Set of 4 heavy-duty pads

• 60 mm pin size for secure mounting

• Polyurethane-lined surface prevents frame damage and slippage

• Ideal for trucks, vans, and body-on-frame vehicles

Medium Adapter (60 mm Pin)

• Set of 4 adapters, 2.5" height

• Perfect for vehicles with uneven underbodies

• Adds precise lifting height while maintaining safety

Tall Adapter (60 mm Pin)

• Set of 4 adapters, 5" height

• Increases vertical pad placement for higher vehicles

• Designed for heavy-duty use and secure lift engagement

Specifications

Capacity

• Lifting Capacity: 10,000 lbs (4,536 kg)

• Max Capacity / Front Axle: 5,000 lbs (2,268 kg)

• Max Capacity / Rear Axle: 5,000 lbs (2,268 kg)

• Max Load per Arm: 2,500 lbs (1,134 kg)

Rise

• Lift Rise: 75" (1,905 mm)

• Rise + Pad: 79.5" (2,007 mm)

• Rise + Pad + 63 mm Adapter: 89" (2,261 mm)

• Minimum Height + Pad: 4" (102 mm)

• Time to Full Rise: 45 seconds

Outside Dimensions

• Height Overall: 157" (3,988 mm)

• Width Overall: 135" (3,429 mm) or 145" (3,683 mm)

• Outside Columns: 127" (3,226 mm) or 137" (3,480 mm)

Inside Dimensions

• Inside Columns: 108.25" (2,750 mm) or 118.25" (3,004 mm)

• Drive-Thru Clearance: 92" (2,337 mm) or 102" (2,591 mm)

Arms & Pads

• Front Arm Reach (Min): 22" (559 mm)

• Front Arm Reach (Max): 47.5" (1,207 mm)

• Rear Arm Reach (Min): 29.5" (749 mm)

• Rear Arm Reach (Max): 57" (1,448 mm)

• Screw Pad Adjustment: 2" (51 mm)

Power Unit

• Motor: 220 VAC, 60 Hz, 1 Phase

• Noise Level: <70 dB

A $395 surcharge from the freight carrier will be applied if no forklift or loading dock is available at the delivery location.