Fits like the original. A bit tricky to install. Must clean and polish the inside track of the chrome strip with 600 grit until smooth. Lube the groove and bottom of the new rubber with silicone paste. Grip the end of the new rubber with pliers and drag into the groove. If it tears out of the pliers, wrap the rubber with a small piece of 80 grit for about an inch or 2 and sandwich it with 2 pieces of sheet metal strips and drag into the groove. The fat end of the rubber will thin out when stretched and slide more easily. Allow a bit of excess at the ends to compensate for shrinkage/retraction. Trim ends with scissors or razor knife to suit.